#
Strength of materials
Resource Information
The concept ** Strength of materials** represents the subject, aboutness, idea or notion of resources found in **University of Oklahoma Libraries**.

The Resource
Strength of materials
Resource Information

The concept

**Strength of materials**represents the subject, aboutness, idea or notion of resources found in**University of Oklahoma Libraries**.- Label
- Strength of materials

## Context

Context of Strength of materials#### Subject of

- A comparison of the bond strength of bundled bars and spaced bars when embedded in concrete
- A compressive failure model for anisotropic plates with a cutout under compressive and shear loads : final technical report
- A controlled thermal environment for dielectric breakdown strength studies
- A determination of the elastic constants of pottery plaster
- A force-frequency analysis of tapered cylinders in wind stream
- A handbook of testing,
- A historical note on the application of the "weakest-link" idea to tensile strengths
- A history of the theory of elasticity and of the strength of materials, : from Galilei to Lord Kelvin.
- A history of the theory of elasticity and of the strength of materials, : from Galilei to the present time.
- A penetration test for determining the compressive strength of low-density concrete
- A practical treatise on bridge-construction: : being a text-book on the design and construction of bridges in iron and steel. For the use of students, draughtsmen, and engineers.
- A practical treatise on the strength and stiffness of timber : intended as a guide for engineers, architects, carpenters ... : to which is added an abstract of problems and rules, with tables for estimating by inspection the strength, magnitude, and flexure of cast iron and timber beams : also tables of the properties of timber, metal, brick, clay, earth, and stone
- A review of dimensional instability in metals
- A solution procedure for behavior of thick plates on a nonlinear foundation and postbuckling behavior of long plates
- A test for interfacial effects and stress transfer in ceramic matrix composites : final report
- A treatise on the strength of materials : with rules for application in architecture, the construction of suspension bridges, railways, etc., and an appendix ..
- A treatise on the strength of timber, cast and malleable iron, and other materials: : with rules for application in architecture, the construction of suspension bridges, railways, &c.; and an appendix on the power of locomotive engines, and the effect of inclined planes and gradients. With seven plates.
- A treatise on the strength of timber, cast iron, malleable iron, and other materials : with rules for application in architecture, construction of suspension bridges, railways, etc. : with an appendix on the power of locomotive engines, and the effect of inclined planes and gradients
- A treatise on the strength of timber, cast iron, malleable iron, and other materials : with rules for application in architecture, construction of suspension bridges, railways, etc., with an appendix on the power of locomotive engines, and the effect of inclined planes and gradients
- A.S.T.M. manual on presentation of data
- Acoustic properties and durability of liner materials at non-standard atmospheric conditions
- Additional static and fatigue tests of high-strength aluminum-alloy bolted joints
- Advanced composites structural concepts and materials technologies for primary aircraft structures : advanced material concepts
- Advanced manufacturing development of a composite empennage component for L-1011 aircraft, Phase III, Final report | Production readiness verification testing
- Advanced mechanics of materials
- Advanced mechanics of materials
- Advanced mechanics of materials
- Advanced mechanics of materials
- Advanced mechanics of materials
- Advanced mechanics of materials
- Advanced mechanics of materials
- Advanced mechanics of materials and applied elasticity
- Advanced mechanics of materials,
- Advanced mechanics of materials,
- Advanced mechanics of materials.
- Advanced strength and applied elasticity
- Advanced strength and applied elasticity
- Advanced strength and applied stress analysis
- Advanced strength of materials
- Advanced strength of materials
- An analysis of skew slabs by the brittle-material method
- An essay on the strength and stress of timber, : founded upon experiments performed at the Royal Military Academy, on specimens selected from the Royal Arsenal, and His Majesty's Dock-Yard, Woolwich: preceded by an historical review of former theories and experiments, with numerous tables and plates. Also an appendix on the strength of iron, and other materials.
- An evaluation of a laterally confined isothermal test technique to estimate the shock behavior of low-strength materials
- An evaluation of mixed-mode delamination failure criteria
- An evaluation of tensile strength testing
- An interdisciplinary approach to fracture and strength of solids.
- An investigation into geometry and microstructural effects upon the ultimate tensile strengths of butt welds : final report
- An investigation of Poisson's ratio as related to other physical characteristics of materials
- An investigation of web sections of eccentrically loaded brackets
- Analysis and testing of adhesive bonds
- Analysis of vibratory methods for determining over heat conditions in jet turbine rotor wheels
- Application and calibration of a six component wind tunnel balance system using electrical resistance strain gages
- Applied elasticity
- Applied mechanics and strength of materials
- Applied mechanics of solids
- Applied mechanics: : an elementary general introduction to the theory of structures and machines. | With diagrams, illustrations, and examples.
- Applied statics and strength of materials
- Applied statics and strength of materials
- Applied statics, strengths of materials, and building structure design
- Applied strength of materials
- Atomic oxygen durability evaluation of protected polymers using thermal energy plasma systems
- Bearing strength of bolted timber joints
- Bearing strengths of some aluminum-alloy permanent-mold castings
- Behavior of flexible cylinders buried in sand under static and dynamic loading
- Behavior of structural materials exposed to an organic moderated reactor environment
- Bending of rectangular plates with all edges clamped
- Bending strength and stiffness of bridge piles after 85 years in the Milwaukee River
- Bending strength of shallow glued-laminated beams of a uniform grade
- Bulletin on material toughness
- Chemistry and physics of mechanical hardness
- Collection, processing, and reporting of damage tolerant design data for non-aerospace structural materials
- Comparative strengths of some adhesive-adherend systems
- Comparison of Weibull strength parameters from flexure and spin tests of brittle materials
- Comparison of the relative effectiveness of reinforcement around holes in plates
- Compressive strength-maturity relationships of mortar containing fly ash
- Computer-aided analysis of concrete strength test results
- Concepts of fracture toughness and structural integrity
- Concrete strength during construction
- CongrÃ¨s international pour l'essai des matÃ©riaux
- Connections in precast concrete structures-- bearing strength of column heads
- Continued observations on the distribution of stress in the vicinity of a crack in the center of a plate : supplement to DMIC memorandum 178
- Correlation between strength properties in standard test specimens and molded phenolic parts
- Corrosion resistance of high-performance materials : titanium, tantalum, zirconium
- Creation of high-strength structures and joints by setting up local material properties (II)
- Creep-rupture reliability analysis
- Damage tolerant composite wing panels for transport aircraft
- Development and implementation of time-dependent cracking material model for concrete
- Douglas fir use book
- Durability of engineering structures : design, repair and maintenance
- Eddy current behavior in certain nickel alloy materials
- Effect of bore-hole stresses on set cement
- Effect of cell shape on compressive strength of hexagonal honeycomb structures
- Effect of corrosion and bar spacing on bond properties of reinforcing bars in concrete
- Effect of impact damage and open hole on compressive strength of hybrid composite laminates
- Effect of increased moisture content on the shear strength of glue lines of box beams and on the glue-shear and glue-tension strengths of small specimens
- Effect of initial delamination on mode I and mode II interlaminar fracture toughness and fatigue fracture threshold
- Effect of low-speed impact damage and damage location on behavior of composite panels
- Effect of open circular holes on tensile strength and elongation of sheet specimens of some aluminum alloys
- Effect of paperboard stress-strain characteristics on strength of singlewall corrugated fiberboard : a theoretical approach
- Effects of certain defects and stress-concentrating factors on the strength of tension flanges of box beams
- Elastic bearing constant of wood : effects of moisture content conditions
- Elasticity and strength
- Elasticity for engineers
- Elasticity in engineering mechanics
- Elasticity in engineering mechanics
- Electrical properties of materials for high temperature strain gage applications : final report
- Electronic Basis of the Strength of Materials
- Electronic basis of the strength of materials
- Elementary statics and strength of materials
- Elementary theory of structural strength
- Elements of mechanics of elastic solids
- Elements of mechanics of materials
- Elements of mechanics of materials
- Elements of strength of materials
- Elements of strength of materials
- Elements of strength of materials,
- Energy absorption of structures and materials
- Energy absorption of structures and materials
- Engineering considerations of stress, strain, and strength
- Engineering materials : their mechanical properties and applications
- Engineering materials, : their mechanical properties and applications
- Engineering mechanics of deformable bodies
- Engineering mechanics of deformable bodies
- Engineering mechanics of materials
- Engineering radiography,
- Environmental durability issues for solar power systems in low earth orbit
- Essai sur la resistance des bois de construction, : avec un appendice sur la resistance du fer et d'autres materiaux,
- Estimation and confidence intervals for parameters of a cumulative damage model
- Evaluation of the stiffness of a roof system made of glued-laminated beams and heavy timber decking
- Examples in the strength and elasticity of materials,
- Experimental mechanics of solids
- Experimental mechanics of solids
- Experimental stress analysis for materials and structures : stress analysis models for developing design methodologies
- Experimental stress analysis of a circular bubble chamber window with a beveled mounting
- Experiments on the transverse strength and other properties of malleable iron, with reference to its uses for railway bars : and a report founded on the same, addressed to the directors of the London and Birmingham Railway Company
- Fatigue of sandwich constructions for aircraft, aluminum face and paper honeycomb core sandwich material tested in shear
- Fatigue of sandwich constructions for aircraft, aluminum facing and aluminum honeycomb core sandwich material tested in shear
- Fatigue of sandwich constructions for aircraft, cellular cellulose acetate core material with aluminum or fiberglas-laminate facings, tested in shear
- Fiber composite structural durability and damage tolerance : simplified predictive methods
- Foundation vibration analysis : a strength-of-materials approach
- Fracture mechanics in engineering practice
- Friction and wear of metals with a single-crystal abrasive grit of silicon carbide : effect of shear strength of metal
- Gripped-end effect in tension proof testing of dimension lumber
- Handbook of stress and strength: : design and material applications
- Handbook of structural stability, Part VI, Strength of stiffened curved plates and shells
- High strength bars as concrete reinforcement, Part l. Introduction to a series of experimental reports / by Eivind Hognestad
- High-performance construction materials : science and applications
- History of strength of materials, : with a brief account of the history of theory of elasticity and theory of structures
- Holografische Interferometrie : Grundlagen, Methoden und ihre Anwendung in der Festkorpermechanik
- How strong is it? : a mighty book all about strength
- Impact strength of materials
- Impact testing of materials
- In situ tests for the determination of rock mass shear strength
- In-plane, flexural, twisting and thickness-shear coefficients for stiffness and damping of a monolayer filamentary composite
- Increasing the compressive strength of 24S-T aluminum-alloy sheet by flexure rolling
- Inelastic behavior of load-carrying members
- Inelastic deflection and buckling of fuel plates due to fluid velocity and compressive edge loads
- Influence of concrete strength on strand transfer length
- Interface considerations in A1O/NiAl composite
- Interpretation of fwd data when pavement layers are not intact / by Y. Richard Kim, Yung-Chien Lee, Sunwoo Park, S. Ranji Ranjithan
- Introduction to aerospace structural analysis
- Introduction to materials science
- Introduction to mechanics of materials
- Introduction to mechanics of solids
- Introduction to the mechanics of solids
- Introduction to the mechanics of solids
- Introduzione alla teoria della elasticitÃ : meccanica dei solidi continui in regime lineare elastico
- Johnson's Materials of construction,
- Johnson's Materials of construction,
- Johnson's Materials of construction,
- Johnson's Materials of construction;
- L'unitÃ© de la force et l'unitÃ© de la matiÃ¨re dans la conception physique uniforme du monde
- Laboratory tests on structural assemblies of brick and tile
- Lamination of hardwood composite framing with an emulsion polymer-isocyanate adhesive and radio-frequency curing
- LeÃ§ons de mÃ©canique pratique : rÃ©sistance des matÃ©riaux
- Link mechanisms ; : Gearing ; Gear trains and cams ; Pulleys and belting ; Materials of construction ; Strength of materials ; The testing of materials ; Machine design
- Localized failures of architectural sandwich columns having foamed-plastic cores
- Longitudiual [sic] vibration of rods in case when the mass of the rod is considered
- Machine gun liner bond strength
- Materials and structures; : a text-book for engineering students,
- Materials testing, theory and practice,
- Materials testing; : theory and practice,
- Materials testing; : theory, practice and significance of physical tests on engineering materials,
- Materials under stress,
- Measurement of impact parameters from ballistic tests
- Mechanical behavior of materials
- Mechanical behavior of materials : engineering methods for deformation, fracture and fatigue
- Mechanical design in organisms
- Mechanical design in organisms
- Mechanical metallurgy
- Mechanical shock
- Mechanical shock
- Mechanics and durability of solids
- Mechanics and materials for design
- Mechanics and strength of materials
- Mechanics of deformable solids
- Mechanics of engineering : comprising statics and dynamics of solids, the mechanics of the materials of construction, or strength and elasticity of beams, columns, shafts, arches, etc., and the principles of hydraulics and pneumatics, with applications, for use in technical schools
- Mechanics of engineering materials
- Mechanics of engineering materials
- Mechanics of engineering. : Comprising statics and dynamics of solids; the mechanics of the materials of construction, or strength and elasticity of beams, columns, shafts, arches, etc.; and the principles of hydraulics and pneumatics, with applications. For use in technical schools.
- Mechanics of material behavior : the Daniel C. Drucker anniversary volume
- Mechanics of material forces
- Mechanics of material forces
- Mechanics of materials
- Mechanics of materials
- Mechanics of materials
- Mechanics of materials
- Mechanics of materials
- Mechanics of materials
- Mechanics of materials
- Mechanics of materials
- Mechanics of materials
- Mechanics of materials
- Mechanics of materials
- Mechanics of materials
- Mechanics of materials
- Mechanics of materials
- Mechanics of materials
- Mechanics of materials
- Mechanics of materials
- Mechanics of materials
- Mechanics of materials
- Mechanics of materials : [by] Archie Higdon, Edward H. Ohlsen [and] William B. Stiles
- Mechanics of materials : an introduction to the mechanics of elastic and plastic deformation of solids and structural components
- Mechanics of materials : an introduction to the mechanics of elastic and plastic deformation of solids and structural components
- Mechanics of materials : an introduction to the mechanics of elastic and plastic deformation of solids and structural materials
- Mechanics of materials : an introduction to the mechanics of elastic and plastic deformation of solids and structural materials, 2
- Mechanics of materials,
- Mechanics of materials,
- Mechanics of solid materials
- Mechanics of solid materials
- Mechanics of solids
- Mechanics of solids
- Mechanics of solids
- Mechanics of solids : concepts and applications
- Mechanics of solids and structures
- Mechanics of structures : variational and computational methods
- Metallic materials with high structural efficiency
- Microstructural randomness and scaling in mechanics of materials
- Modern marvels, Season 17 | Episode 11, Super strong countdown
- Modern marvels. Season 17. Episode 11, Super strong countdown
- More efficient creep ratcheting bounds
- MÃ©canique des structures
- New approaches in the manufacturing processes : special topic volume with invited peer reviewed papers only
- Optimal protection from impact, shock, and vibration
- Physical metallurgy of stress corrosion fracture.
- Physics of strength and fracture control : adaptation of engineering materials and structures
- Physics of strength and plasticity.
- Plasticity; : a mechanics of the plastic state of matter,
- Ply-level failure analysis of a graphite/epoxy laminate under bearing-bypass loading
- Practical mechanics and strength of materials,
- Practical mechanics and strength of materials,
- Preliminary evaluation of a tension test for concrete repairs
- Preliminary investigation of the compressive strength and creep lifetime of 2024-T3 (formerly 24S-T3) aluminum-alloy plates at elevated temperatures
- Preliminary investigation of the compressive strength and creep lifetime of 2024-T3 (formerly 24S-T3) aluminum-alloy plates at elevated temperatures
- Probability of brittle failure
- Process vessels subject to explosion risk : design guidelines for the pressure rating of weak process vessels subject to explosion risk
- Process vessels subject to explosion risk : design guidelines for the pressure rating of weak process vessels subject to explosion risk
- Properties and mechanics of materials,
- Properties of concrete made with North Carolina recycled coarse and fine aggregates
- Properties of crystalline solids: : Materials Sciences luncheon address; symposium on recent progress in materials sciences, symposium on nature and origin of strength of materials. Presented at the sixty-third annual meeting , American Society for Testing Materials, June 27, 1960
- Properties of engineering materials
- Properties of engineering materials,
- Properties of honeycomb cores as affected by fiber type, fiber orientation, resin type, and amount
- Properties of metals in materials engineering
- R.I.L.E.M. bulletin
- Rectangular concrete stress distribution in ultimate strength design
- Reliability analysis of shear wall structures
- Report on trial of Gruson's chilled cast-iron armor at Spezia, Italy, Apr. 20-29, 1886
- Resistance of materials
- Resistance of materials,
- Resistencia de materiales. : Conferencias dictadas en la Facultad de matemÃ¡ticas e ingenierÃa,
- Resolutions of conventions held at Munich, Dresden, Berlin, and Vienna, for purpose of adopting uniform methods for testing construction materials with regard to their mechanical properties
- Review of data on effect of speed in mechanical testing of concrete
- Review of dimensional instability in metals
- Rigidity theory and applications
- Rigidity theory and applications / : edited by M.F. Thorpe and P.M. Duxbury
- Robust rocket engine concept
- Sand replacement in structural lightweight concrete : splitting tensile strength
- Scaling effects in angle-ply laminates
- Scaling of structural strength
- Screw withdrawal resistance of types A and AB sheet metal screws in particleboard and medium-density hardboard
- Selected A.S.T.M. standards for students in engineering
- Selection of engineering materials and adhesives
- Shear strength, polymorphism, and mechanical behavior of Olivine, Enstatite, Diopside, Labradorite, and Pyrope Garnet : Tests to 920Â° C and 60 kb
- Shear strengthening of pretensioned prestressed concrete composite flexural members
- Simplified design of structural steel
- Simplified design of structural steel,
- Simplified mechanics and strength of materials
- Simplified mechanics and strength of materials
- Simplified problems in strength of materials and structural design
- Simulation studies for surfaces and materials strength
- Simulation studies for surfaces and materials strength : semiannual progress report for cooperative agreement NCC2-297 for the period May 1, 1991 - October 31, 1991
- Sinusoidal vibration
- Some observations of the distribution of stress in the vicinity of a crack in the center of a plate
- Spall fracture
- Spall strength of tungsten carbide
- Springer handbook of experimental solid mechanics
- Statics and strength of materials
- Statics and strength of materials
- Statics and strength of materials
- Statics and strength of materials
- Statics and strength of materials
- Statics and strength of materials
- Statics and strength of materials for architecture and building construction
- Statics and strength of materials for architecture and building construction
- Statics and strength of materials for architecture and building construction
- Statics and strength of materials,
- Statics of deformable bodies
- Statics of deformable solids
- Statistical considerations in duration of load research
- Statistical shape and deformation analysis : methods, implementation and applications
- Statistical strength theory.
- Stereographic method of determining whether planes of weakness transect pillars
- Stochastic modeling of crack initiation and short-crack growth under creep and creep-fatigue conditions
- Strength analysis in geomechanics
- Strength analysis in geomechanics
- Strength analysis in geomechanics
- Strength and Toughness of Materials
- Strength and deformation characteristics of pavement structures
- Strength and deformation in nonuniform temperature fields, : a collection of scientific papers.
- Strength and durability of residential concretes containing fly ash
- Strength and fracture of engineering solids
- Strength and stiffness assessment of standing trees using a nondestructive stress wave technique
- Strength and stiffness of engineering systems
- Strength and stiffness of reinforced concrete rectangular columns under biaxially eccentric thrust / J.A. Desai and R.W. Furlong
- Strength and structure of engineering materials
- Strength and toughness of monolithic and composite silicon nitrides
- Strength characteristics and air-leakage determinations for alternative mine seal designs
- Strength of biological materials.
- Strength of glued laminated Sitka spruce made up of rotary-cut veneers
- Strength of heat-treated steel tubing under combined bending and axial loads
- Strength of materials
- Strength of materials
- Strength of materials
- Strength of materials
- Strength of materials
- Strength of materials
- Strength of materials
- Strength of materials
- Strength of materials
- Strength of materials
- Strength of materials
- Strength of materials ...
- Strength of materials : a unified theory
- Strength of materials and structures
- Strength of materials for engineering technology
- Strength of materials for technology
- Strength of materials,
- Strength of materials,
- Strength of materials,
- Strength of materials,
- Strength of materials,
- Strength of materials,
- Strength of materials,
- Strength of materials,
- Strength of materials,
- Strength of materials,
- Strength of materials.
- Strength of materials.
- Strength of materials. : A text-book for manual training schools,
- Strength of materials;
- Strength of materials; : a first course
- Strength of metal aircraft elements.
- Strength of metals under combined stresses.
- Strength of prestressed concrete pavements
- Strength of ships and ocean structures
- Strength of structural materials : understanding basic structural design
- Strength prediction of adhesively-bonded joints
- Strength properties of glass and ceramics
- Strength tests of prototype sea disposal containers for radioactive wastes : final report
- Stress analysis and vibrations of elastic bodies
- Stress-strain relations in wood and plywood considered as orthotropic materials
- Structural design criteria by statistical methods
- Structural design for dynamic loads
- Structural engineering,
- Structural guidelines for materials development for tension structures
- Structural integrity and durability of reusable space propulsion systems : proceedings of a conference held at NASA Lewis Research Center, Cleveland, Ohio, May 12-13, 1987
- Structural mechanics; : proceedings.
- Structural model testing -- compensation for time effect in plastics / by J.E. Carpenter
- Structural model testing-- a profile plotter
- Structural testing and design considerations of flexure rods and strain gage beams
- Structures subjected to repeated loading
- Studies in large plastic flow and fracture with special emphasis on the effects of hydrostatic pressure
- Studies of molecular properties of polymeric materials : aerospace environmental effects on three linear polymers : final technical report for the period November 1, 1984 through October 31, 1985
- Symposium on dynamic stress determinations; : presented at the Pacific area national meeting, American Society for Testing Materials, San Francisco, California, October 11, 1949
- Symposium on tension testing of non-metallic materials, : presented at the fifty-ninth annual meeting, American Society for Testing Materials, Atlantic City, N.J., June 20, 1956
- Ten-year ground exposure of composite materials used on the Bell model 206L helicopter flight service program
- Tensile strength and diagonal tension resistance of structural lightweight concrete
- Tensile strengths of silicon carbide (SiC) under shock loading
- Tests of 10 inch 24S-T aluminum-alloy shear panels with 1-1/2 inch holes : 2 - Panels having holes with notched edges
- Tests of a hyperbolic paraboloid reinforced concrete shell
- Tests of extruded magnesium cargo flooring for aircraft
- Tests of prestressed cellular slabs (Slab Nos. 1, 2, 3, and 4)
- Tests of vehicle and implement woods.
- Tests to evaluate concrete pavement subbases
- The Air propeller, its strength and correct shape
- The action of materials under stress; or, Structural mechanics; : comprising the strength and resistance of materials and elements of structural design, with examples and problems
- The analysis of stress and deformation
- The brittle material method applied to stresses in statically indeterminate bent
- The effect of crack length and side grooves on the ductile fracture toughness properties of ASTM A533 steel
- The effect of interface properties on nickel base alloy composites
- The effect of temperature upon the properties of metals; : a symposium held at a joint meeting, May 29, 1924, at Cleveland, Ohio, of the American society of mechanical engineers ... and the American Society for Testing materials
- The effect of torsional rigidity on sheet-stiffener combinations
- The effective stiffness of a stiffener attached to a flat plywood plate
- The effects of pin elasticity, clearance, and friction on the stresses in a pin-loaded orthotropic plate
- The fatigue of metals,
- The materials of construction : a treatis for engineers on the strength of engineering materials
- The materials of construction. : A treatise for engineers on the strength of engineering materials.
- The new science of strong materials : or, Why you don't fall through the floor
- The new science of strong materials,
- The nonlinear viscoelastic response of resin matrix composite laminates
- The nonlinear viscoelastic response of resin matrix composite laminates
- The nonlinear viscoelastic response of resin matrix composite laminates
- The strength and stiffness of shear webs with and without lightening holes
- The strength and stiffness of shear webs with round lightening holes having 45 degree flanges
- The strength of materials : a text-book for engineers and architects
- The strength of materials : a text-book for manual training schools
- The strength of materials; : a treatise on the theory of stress calculations for engineers,
- The strength, fracture, and fatigue of materials.
- The tensile properties of uranium in the inelastic range of stress
- The testing of materials of construction ; : a text-book for the engineering laboratory and a collection of the results of experiment,
- The variation of the dielectric strength of insulating materials with pressure
- Theory of elasticity
- Theory of elasticity,
- Theory of elasticity,
- Theory of flow and fracture of solids
- Timber, its strength, seasoning, and grading,
- Topological optimization of buckling
- U-groove aluminum weld strength improvement
- Ultimate strength of reinforced concrete in American design practice
- Using transverse vibration nondestructive testing techniques to estimate stiffness and strength of southern pine lumber
- Virtual principles in aircraft structures
- Wear of advanced materials
- Wood-plastic composites
- Yield design

## Embed (Experimental)

### Settings

Select options that apply then copy and paste the RDF/HTML data fragment to include in your application

Embed this data in a secure (HTTPS) page:

Layout options:

Include data citation:

<div class="citation" vocab="http://schema.org/"><i class="fa fa-external-link-square fa-fw"></i> Data from <span resource="http://link.libraries.ou.edu/resource/vmwT9uvrYuY/" typeof="CategoryCode http://bibfra.me/vocab/lite/Concept"><span property="name http://bibfra.me/vocab/lite/label"><a href="http://link.libraries.ou.edu/resource/vmwT9uvrYuY/">Strength of materials</a></span> - <span property="potentialAction" typeOf="OrganizeAction"><span property="agent" typeof="LibrarySystem http://library.link/vocab/LibrarySystem" resource="http://link.libraries.ou.edu/"><span property="name http://bibfra.me/vocab/lite/label"><a property="url" href="http://link.libraries.ou.edu/">University of Oklahoma Libraries</a></span></span></span></span></div>

Note: Adjust the width and height settings defined in the RDF/HTML code fragment to best match your requirements

### Preview

## Cite Data - Experimental

### Data Citation of the Concept Strength of materials

Copy and paste the following RDF/HTML data fragment to cite this resource

`<div class="citation" vocab="http://schema.org/"><i class="fa fa-external-link-square fa-fw"></i> Data from <span resource="http://link.libraries.ou.edu/resource/vmwT9uvrYuY/" typeof="CategoryCode http://bibfra.me/vocab/lite/Concept"><span property="name http://bibfra.me/vocab/lite/label"><a href="http://link.libraries.ou.edu/resource/vmwT9uvrYuY/">Strength of materials</a></span> - <span property="potentialAction" typeOf="OrganizeAction"><span property="agent" typeof="LibrarySystem http://library.link/vocab/LibrarySystem" resource="http://link.libraries.ou.edu/"><span property="name http://bibfra.me/vocab/lite/label"><a property="url" href="http://link.libraries.ou.edu/">University of Oklahoma Libraries</a></span></span></span></span></div>`