#
Mathematical models
Resource Information
The concept ** Mathematical models** represents the subject, aboutness, idea or notion of resources found in **University of Oklahoma Libraries**.

The Resource
Mathematical models
Resource Information

The concept

**Mathematical models**represents the subject, aboutness, idea or notion of resources found in**University of Oklahoma Libraries**.- Label
- Mathematical models

- Source
- nasat

## Context

Context of Mathematical models#### Subject of

- "Magnetotail particle dynamics and transport" : final report for NAGW-1176
- 4D dynamic required navigation performance final report
- A "Kane's Dynamics" model for the active rack isolation system
- A cloud, precipitation and electrification modeling effort for COHMEX
- A comparison of analytical and experimental data for a magnetic actuator
- A comparison of analytical and experimental data for a magnetic actuator
- A compendium of wind statistics and models for the NASA space shuttle and other aerospace vehicle programs
- A computational investigation of gear windage
- A computational methodology for simulating thermal loss testing of the Advanced Stirling C
- A computer module used to calculate the horizontal control surface size of a conceputal aircraft design
- A conflict analysis of 4D descent strategies in a metered, multiple-arrival route environment
- A constitutive model for the inelastic multiaxial cyclic response of a nickel base superalloy Rene 80
- A constitutive model for the inelastic multilaxial cyclic response of a nickel base superalloy RenÃ© 80
- A deterministic interfacial cyclic oxidation spalling model, Part I, Model development and parametric response
- A direct-inverse method for transonic and separated flows about airfoils
- A general reversible hereditary constitutive model, Part I, Theoretical developments
- A generic interface element for COMET-AR : contracts NAS1-19000 and NAS1-19700
- A lattice model for data display
- A life prediction model for laminated composite structural components : final technical report
- A life-cycle cost estimating methodology for NASA-developed air traffic control decision support tools
- A massively parallel computational approach to coupled thermoelastic/porous gas flow problems
- A mathematical model of oxygen transport in skeletal muscle during hindlamb unloading
- A mathematical simulation model of a CH-47B helicopter
- A model for Space Shuttle orbiter tire side forces based on NASA Landing Systems Research Aircraft test results
- A model of security monitoring
- A modeling technique for STOVL ejector and volume dynamics
- A new approach for determining onset of transition : final report : NASA grant NAG-1-1876
- A new approach to measure contact angle and evaporation rate with flow visualization in a sessile drop
- A new approach to measure contact angle and evaporation rate with flow visualization in a sessile drop
- A new higher-order composite theory for analysis and design of high speed tilt-rotor blades
- A novel shape parameterization approach
- A numerical model for dynamic wave rotor analysis
- A numerical model of unsteady, subsonic aeroelastic behavior
- A numerical model of unsteady, subsonic aeroelastic behavior
- A parametric study of accelerations of an airplane due to a wake vortex system
- A practical approach for minimum time control of the spacecraft control laboratory experiment (SCOLE)
- A reduced model for prediction of thermal and rotational effects on turbine tip clearance
- A review of the Ginzburg-Syrovatskii's galactic cosmic-ray propagation model and its leaky-box limit
- A simple model for the light curve generated by a Shoemaker-Levy 9 impact
- A simple transient thermal test assembly for insulation materials
- A study entitled research on orbital plasma-electrodynamics : progress report, period of performance, March 27, 1994 - June 29, 1994
- A system approach to aircraft optimization
- A systems analysis of the erythropoietic responses to weightlessness : Volume I. Mathematical model simulations of the erythropoietic responses to weightlessness
- A systems analysis of the erythropoietic responses to weightlessness : Volume II. Description of the model of erythropoiesis
- A technical report entitled Formulation of the nonlinear analysis of shell-like structures, subjected to time-dependent mechanical and thermal loading
- A theoretical and experimental study of turbulent particle-laden jets
- A transient response method for linear coupled substructures
- A two dimensional interface element for coupling of independently modeled three dimensional finite element meshes and extensions to dynamic and non-linear regimes : performance report (summary report)
- ACCEPT : introduction of the adverse condition and critical event prediction toolbox
- AEOSS design guide for system analysis on Advanced Earth-Orbital Spacecraft Systems
- AEOSS runtime manual for system analysis on Advanced Earth-Orbital Spacecraft Systems
- Accuracy of aerodynamic model parameters estimated from flight test data
- Acoustic and magnetic heating of chromospheres/coronae : are there distinct signatures? : final technical report for grant NAG 5 3046
- Active control of flow separation over an airfoil
- Actively controlled shaft seals for aerospace applications : summary of research, January 1, 1989 - December 31, 1994
- Advanced composite stabilizer for Boeing 737 aircraft
- Advanced composite stabilizer for Boeing 737 aircraft : fifth quarterly technical progress report, 19 July 1978 through 18 October 1978
- Aerodynamic design via control theory
- Aerodynamic parameters of an advanced fighter aircraft estimated from flight data : preliminary results
- Aerothermal analysis of a wing-elevon cove with variable leakage
- Aircraft flight test trajectory control
- An algorithm for integrated subsystem embodiment and system synthesis
- An analytical model for footprint dispersions and its application to mission design : report submitted to NASA-Johnson Space Center
- An energy-based hysteresis model for magnetostrictive transducers : prepared for Langley Research Center under contracts NAS1-97046 & NAS1-19480
- An experiment in hurricane track prediction using parallel computing methods
- An extended objective evaluation of the 29-km eta model for weather support to the United States Space Program
- An extended tow-target differential game model for medium-range air combat game analylsis
- An improved algorithm for the modeling of vapor flow in heat pipes
- An improved error assessment for the GEM-T1 gravitational model
- An initial investigation into methods of computing transonic aerodynamic sensitivity coefficients : semiannual progress report, July 1, 1987-December 31, 1987
- An integrated magnetic circuit model and finite element model approach to magnetic bearing design
- An integrated methodology for optimizing structural composite damping
- An introduction to transient engine applications using the numerical propulsion system simulation (NPSS) and MATLABÂ®
- An inverse dynamic method yielding flexible manipulator state trajectories
- An irreversible constitutive law for modeling the delamination process using interface elements
- An optimal deconvolution method for reconstructing pneumatically distorted near-field sonic boom pressure measurements
- An optimization model for the U.S. air-traffic system
- An optimization model for the U.S. air-traffic system
- Analysis and sizing for transient thermal heating of insulated aerospace vehicle structures
- Analysis of a generally oriented crack in a functionally graded strip sandwiched between two homogeneous half planes
- Analysis of direct solar illumination on the backside of space station solar cells
- Analysis of opposed jet hydrogen-air counter flow diffusion flame
- Analysis of severe atmospheric disturbances from airline flight records
- Analysis of shell-type structures subjected to time-dependent mechanical and thermal loading : a semi-annual status report
- Analysis of shell-type structures subjected to time-dependent mechanical and thermal loading : a semi-annual status report submitted to NASA-Lewis Research Center, Cleveland, Ohio
- Analysis of smart composite structures including debonding
- Analysis of three-dimensional-cavity-backed aperture antennas using a combined finite element method/method of moments/geometrical theory of diffraction technique
- Analysis supporting MSFC cryostat testing unit : final report
- Analytic guided-search model of human performance accuracy in target-localization search tasks
- Analytic theory for the determination of velocity and stability of bubbles in a Hele-Shaw cell, Part II, Stability
- Analytic theory for the selection of Saffman-Taylor fingers in the presence of thin film effects
- Analytical guidance law development for aerocapture at Mars : progress report #4
- Analytical investigation of the dynamics of tethered constellations in Earth orbit (phase II) : quarterly report # 3, for the period 22 September 1985 through 21 December 1985
- Analytical modeling of pressure wall hole size and maximum tip-to-tip crack length for perforating normal and oblique orbital debris impacts : final report for period 01 April 1995 to 31 July 1997, contract NCC8-28
- Analytical round robin for elastic-plastic analysis of surface cracked plates : phase I results
- Analytical round robin for elastic-plastic analysis of surface cracked plates : phase II results
- Analytical study of the origin and behavior of asymmetric vortices
- Annual performance report : planetary and primitive object strength measurement and sampling apparatus : NASA/Washington grant NAGW-2439, for the period 2/1/95-1/31/96 (year two)
- Application of satellite data in variational analysis for global cyclonic systems : status report
- Application of symbolic computations to the constitutive modeling of structural materials
- Application of the semi-empirical force-limiting approach for the CoNNeCT SCAN Testbed
- Applications of Ko displacement theory to the deformed shape predictions of the doubly-tapered Ikhana wing
- Ares I-X flight test vehicle : stack 1 modal test
- Ares I-X flight test vehicle : stack 5 modal test
- Ares I-X flight test vehicle modal test
- Assessing upper-level winds on day-of-launch
- Assimilation of altimeter data into a quasigeostrophic model of the Gulf Stream system, Part I, Dynamical considerations
- Assimilation of altimeter data into a quasigeostrophic model of the Gulf Stream system, Part II, Assimilation results
- Axions and SN 1987A : axion trapping
- Background, current status, and prognosis of the ongoing slush hydrogen technology development program for the NASP
- Bearing-load modeling and analysis study for mechanically connected structures
- Bending strength model for internal spur gear teeth
- Buckling and damage resistance of transversely-loaded composite shells
- CARE III version 4 enhancements
- Calculated values of atomic oxygen fluences and solar exposure on selected surfaces of LDEF
- Calculation of the Coulomb fission cross sections for Pb-Pb and Bi-Pb interactions at 158 A GeV
- Calibration of a structural finite element model for a representative inflatable space structure utilizing probabilistic methods and surrogate models
- Chemoviscosity modeling for thermosetting resins : final report for the period ended August 31, 1985
- Combined theory of reflectance and emittance spectroscopy
- Combustion of lox with H2(g) under subcritical, critical and supercritical conditions (task 1) and experimental observation of dense spray and mixing of impinging jets (task 2) : semi-annual report
- Comparison of predictive modeling methods of aircraft landing speed
- Comparison of several system identification methods for flexible structures
- Comparison of spacecraft contamination models with well-defined flight experiment
- Comparisons of the Maxwell and CLL gas/surface interaction models using DSMC
- Computation of the transonic flow about a swept wing in the presence of an engine nacelle
- Computational analysis of the SSME fuel preburner flow : final report
- Computational simulation of damage propagation in three-dimensional woven composites
- Computational study of near-limit propagation of detonation in hydrogen-air mixtures
- Computational study of near-limit propagation of detonation in hydrogen-air mixtures
- Computational study of separating flow in a planar subsonic diffuser
- Computational work to support FAP/SRW variable-speed power-turbine development
- Computer modeling of human decision making : report
- Computer simulation of a pilot in V/STOL aircraft control loops, Appendix II | The optimal control model of a pilot in V/STOL aircraft control loops
- Computer simulation of the mathematical modeling involved in constitutive equation development : via symbolic computations
- Computerized inspection of gear tooth surfaces
- Conceptual design optimization study
- Confined states in large-aspect-ratio thermosolutal convection
- Constitutive modeling for isotropic materials (HOST)
- Constitutive modeling for isotropic materials (HOST) : third annual status report
- Constitutive soil properties for mason sand and Kennedy Space Center
- Continuum fatigue damage modeling for critical design, control, and fault prognosis
- Corrections to the participant-spectator model of high-energy alpha-particle fragmentation
- Coupled fluid-structure model for improved evaluation of vestibular function during in-flight conditions : a final report
- Critique of macro flow/damage surface representations for metal matrix composites using micromechanics
- Critique of macro flow/damage surface representations for metal matrix composites using micromechanics
- Cryogenic fluid storage technology development : recent and planned efforts at NASA
- Deformation and life analysis of composite flywheel disk and multi-disk systems
- Deformation and life analysis of composite flywheel disk and multi-disk systems
- Delamination modeling of composites for improved crash analysis
- Dependence of dynamic modeling accuracy on sensor measurements, mass properties, and aircraft geometry
- Determination of thermophysical characteristics of solid materials by electrical modelling of the solutions to the inverse problems in nonsteady heat conduction
- Determination of uncertainties for the new SSME model : final technical report ... NASA contract number NAS8-38609 ...
- Developing uncertainty models for robust flutter analysis using ground vibration test data
- Developing uncertainty models for robust flutter analysis using ground vibration test data
- Development and application of benchmark examples for mode II static delamination propagation and fatigue growth predictions
- Development and demonstration of a computational tool for the analysis of particle vitiation effects in hypersonic propulsion test facilities
- Development and validation of a blade-element mathematical model for the AH-64A Apache helicopter
- Development of Ku-Band rendezvous radar tracking and acquisition simulation programs : final report on contract no. NAS 9-17501, DRL no. T-2003, item no. 2
- Development of a benchmark example for delamination fatigue growth prediction
- Development of a model based technique for gear diagnostics using the Wigner-Ville method : final report on NASA project NAG 3-1376
- Development of a woven-grid quasi-bipolar battery : phase I final report
- Development of advanced in-cylinder components and tribological systems for low heat rejection diesel engines : phases 2, 3, and 4 final report
- Development of constitutive models for cyclic plasticity and creep behavior of super alloys at high temperature : final report
- Discrete element weld model, phase II : final report
- Distributed finite element analysis using a transputer network : final report
- Dual-Pulse Pulse Position Modulation (DPPM) for deep-space optical communications : performance and practicality analysis
- Dual-pump CARS development and application to supersonic combustion
- Earth Observing System (EOS)/Advanced Microwave Sounding Unit-A (AMSU-A) Structural Math Model - A1
- Effect of density gradients in confined supersonic shear layers
- Effect of liquid droplets on turbulence in a round gaseous jet
- Effect of liquid droplets on turbulence in a round gaseous jet
- Effect of temperature gradient on thick film selective emitter emittance
- Effect of temperature gradient on thick film selective emitter emittance
- Effects of engine emissions from high-speed civil transport aircraft : a two-dimensional modeling study
- Effects of gear box vibration and mass imbalance on the dynamics of multi-stage gear transmissions
- Effects of humidity swings on adsorption columns for air revitalization : modeling and experiments : summary of research (final report), period covered--1/16/94 - 1/15/97, Joint Research Interchange, NASA cooperative agreement no. NCC2-5024
- Effects of modeling errors on trajectory predictions in air traffic control automation
- Effects of the oceans on polar motion : extended investigations : semi-annual status report, period covered in this report, January through August, 1986
- Efficient computation of separation-compliant speed advisories for air traffic arriving in terminal airspace
- Empirical model development for predicting shock response on composite materials subjected to pyroshock loading
- Empirical modeling of environment-enhanced fatigue crack propagation in structural alloys for component life prediction
- Empirical models for use in designing decompression procedures for space operations
- Energy efficient engine low pressure subsystem aerodynamic analysis
- Energy efficient engine low pressure subsystem aerodynamic analysis
- Energy efficient engine low pressure subsystem flow analysis
- Enhanced computer aided simulation of meshing and contact with application for spiral bevel gear drives
- Equivalent linearization analysis of geometrically nonlinear random vibrations using commercial finite element codes
- Estimation of aircraft nonlinear unsteady parameters from wind tunnel data
- Euler and Navier-Stokes computations for two-dimensional geometries using unstructured meshes
- Evolutionary development of the Simulation by Logical Modeling System (SIBYL)
- Examination of relationship between photonic signatures and fracture strength of fused silica used in orbiter windows
- Examination of solar cycle statistical model and new prediction of solar cycle 23
- Experimental and modeling studies of the combustion characteristics of conventional and alternative jet fuels final report
- Experimental characterization and micromechanical modeling of woven carbon/copper composites
- Exploratory studies in generalized predictive control for active gust load alleviation
- Exponential order statistic models of software reliability growth
- Extension of a noninteractive reliability model for ceramic matrix composites
- Fast reconnection of weak magnetic fields
- Fault injection and monitoring capability for a fault-tolerant distributed computation system
- Fifth International Conference on Squeezed States and Uncertainty Relations : proceedings of a conference held at Balatonfured, Hungary, May 27-31, 1997
- Final report for SRB combustion dynamics analysis computer program (CDA-1)
- Final technical report for development and application of viscoplastic models in nonlinear structural analysis : NASA grant number, NCC3-120 : grant duration, December 5, 1998 to December 1, 1994
- Finite and boundary element modeling of the NASA Langley aluminum testbed cylinder (ATC)
- Finite element model for failure study of two-dimensional triaxially braided composite
- Flight data reduction of wake velocity measurements using an instrumented OV-10 airplane
- Flight data reduction of wake velocity measurements using an instrumented OV-10 airplane
- Flows in pinned arrays simulating brush seals
- Flush airdata sensing (FADS) system calibration procedures and results for blunt forebodies
- Force balance and substorm effects in the magnetotail
- Fractography of composite delamination : final report
- Free vibration and dynamic response analysis of spinning structures : final report
- Free vibrations of thin-walled semicircular graphite epoxy composite frames
- Frequency based localization of structural discrepancies
- Frequency shift during mass properties testing using compound pendulum method
- Fundamental Remote Sensing Science Research Program, Part 1, Status report of the Scene Radiation and Atmospheric Effects Characterization Project
- Fundamental Remote Sensing Science Research Program, Part 1, Status report of the Scene Radiation and Atmospheric Effects Characterization Project
- G-jitter effects in protein crystal growth : a numerical study
- Gas-jet and tangent-slot film cooling tests of a 12.50 cone at Mach number of 6.7
- Gear crack propagation investigations
- Generalized fluid system simulation program, version 5.0--educational
- Generalized predictive control of dynamic systems with rigid-body modes
- Geodynamics branch data base for main magnetic field analysis
- Geomagnetic main field modeling using magnetohydrodynamic constraints
- Geomagnetic model investigations for 1980-1989 : a model for Strategic Defense Initiative particle beam experiments and a study in the effects of data types and observatory bias solutions
- Geometrical modelling of textile reinforcements : final technical report
- Geometry and simulation results for a gas turbine representative of the energy efficient engine (EEE)
- Grain shattering in shocks : the interstellar grain size distribution
- Gravitational couplings of the inflaton in extended inflation
- Gravity wave innitiated [sic] convection
- Ground based studies of thermocapillary flows in levitated drops : analytical part : final report (April 1, 1993 - December 31, 1996), NASA grant no.--NAGW-3378
- HC1 absorption toward Sagittarius B2
- HYTESS, a Hypothetical Turbofan Engine Simplified Simulation
- Heat entrapment effects within liquid acquisition devices
- Heat transfer and flow on the blade tip of a gas turbine equipped with a mean-camberline strip
- Heating-rate-coupled model for hydrogen reduction of JSC-1A
- Hierarchic plate and shell models based on p-extension
- Hierarchic plate and shell models based on p-extension
- Hierarchical safety cases
- High Energy Astrophysics Program (HEAP) : NASA contract NAS5-32490, technical report--April 1, 1996 thru September 30, 1996
- High strain rate deformation modeling of a polymer matrix composite
- High temperature furnace modeling and performance verifications : semi-annual progress report, NAG8-5
- High-performance parallel analysis of coupled problems for aircraft propulsion : under grant NAG3-1425
- Identifying and characterizing discrepancies between test and analysis results of compression-loaded panels
- Impact testing and simulation of composite airframe structures
- Impact testing on reinforced carbon-carbon flat panels with ice projectiles for the space shuttle return to flight program
- Implementation of a smeared crack band model in a micromechanics framework
- Implementation of an integrated on-board aircraft engine diagnostic architecture
- Improved model for solar cosmic ray exposure in manned earth orbital flights
- Improved modeling of finite-rate turbulent combustion processes in research combustors
- Improved subcell model for the prediction of braided composite response
- Improvement and extension of a radar forest backscattering model : semiannual report
- Improvement of the second - and third-moment modeling of turbulence
- Incongruity, incongruity resolution, and mental states : the measure and modification of situational awareness and control : final report ... : project period, January 1, 1994 to December 31, 1997
- Independent peer review of Communications, Navigation, and Networking re-Configurable Testbed (CoNNeCT) project Antenna Pointing Subsystem (APS) Integrated Gimbal Assembly (IGA) structural analysis
- Indirect identification of linear stochastic systems with known feedback dynamics
- Influence of a simple heat loss profile on a pure diffusion flame
- Inspection of the Math Model Tools for on-orbit assessment of impact damage report
- Integrated Technology Rotor Methodology Assessment Workshop : proceedings of a workshop
- Integrated formal analysis of timed-triggered ethernet
- Integrated research in constitutive modelling at elevated temperatures
- Integrated risk/cost planning models for the U.S. air traffic system
- Integrated risk/cost planning models for the U.S. air traffic system
- Integration assessment of visiting vehicle induced electrical charging of the International Space Station structure
- Intelligent systems approach for automated identification of individual control behavior of a human operator
- Intensity to frequency conversion technique in intensity modulated fiber optic sensing systems
- International Space Station ECLSS technical task agreement summary report
- International Space Station ECLSS technical task agreement summary report
- Inverse problems in the modeling of vibrations of flexible beams : final report
- Inverse problems in the modeling of vibrations of flexible beams : final report
- Investigation of a macromechanical approach to analyzing triaxially-braided polymer composites
- Investigation of near Shannon limit coding schemes
- Investigation of the Saturn dust environment from the analysis of energetic charged particle measurements : final technical report
- Investigation of water vapor motion winds from geostationary satellites
- Issues of long-term cryogenic propellant storage in microgravity
- Kinematic/dynamic characteristics for visual and kinesthetic virtual environments : final report, cooperative agreement NCC 2-797
- Kinetic theory model predictions compared with low-thrust axisymmetric nozzle plume data
- LDEF satellite radiation analyses : final report, contract no. NAS8-39386
- LOX/hydrogen coaxial injector atomization test program
- Laser doppler velocimeter measurements and laser sheet imaging in an annular combustor model
- Life limiting behavior in interlaminar shear of continuous fiber-reinforced ceramic matrix composites at elevated temperatures
- Lightning effects in the payload changeout room
- Liquid acquisition device design sensitivity study
- Local and global bifurcations of flow fields during physical vapor transport : application to a microgravity experiment
- Local-global analysis of crack growth in continuously reinforced ceramic matrix composites
- Long-term global morphology of gravity wave activity using UARS data : quarterly report, Mar 18, 1998-Jun 18, 1998
- Low Reynolds number [kappa]-[epsilon] and empirical transition models for oscillatory pipe flow and heat transfer
- Low-frequency sound propagation modeling over a locally-reacting boundary using the parabolic approximation
- METSAT, Advanced Microwave Sounding Unit-A1 (AMSU-A1), structural mathematical model
- METSAT, advanced microwave sounding unit-A2 (AMSU-A2) structural mathematical model
- MOEMS modeling using the geometrical matrix toolbox
- Mach number effects on turbine blade transition length prediction
- Manual for a workstation-based generic flight simulation program (LaRCsim), version 1.4
- Manufacturing and cost considerations in multidisciplinary aircraft design : (research on mathematical modeling of manufacturability factors) : NASA grant NAG-1-1716, grant report, period of performance: May 1995 - October 1996
- Material property characterization of AS4/VRM-34 textile laminates
- Mathematical model of bubble sloshing dynamics for cryogenic liquid helium in orbital spacecraft dewar container
- Mathematical modeling of electrodynamics near the surface of the Earth and planetary water worlds
- Measurement and modeling of dispersive pulse propagation in drawn wire waveguides
- Measurement of the correlation and coherence lengths in boundary layer flight data
- Membrane Transport Phenomena (MTP) : semi-annual technical progress report, June 1997-October 1997 : contract number NAS8-40633
- Metal matrix composites microfracture : computational simulation
- Micromechanical modeling of woven metal matrix composites : [final contractor report]
- Micromechanical models for textile structural composites
- Micromechanics Analysis Code post-processing (MACPOST) user guide
- Micromechanics analysis code with generalized method of cells (MAC/GMC) : user guide, version 3.0
- Micromechanics of compression failures in open hole composite laminates : a report
- Microscale fracture testing of HfO2-Si environmental barrier coatings
- Microstructural characterization of metal foams : an examination of the applicability of the theoretical models for modeling foams
- Microstructural characterization of metal foams : an examination of the applicability of the theoretical models for modeling foams
- Microstructure modeling of third generation disk alloys : final report
- Missile aerodynamics for ascent and re-entry
- Mixed H2H(sub infinity)--control, with output feedback compensators using parameter optimization : interim annual technical report
- Model development in viscoplastic ratchetting
- Model verification and validation concepts for a probabilistic fracture assessment model to predict cracking of knife edge seals in the space shuttle main engine high pressure oxidizer
- Model-based VQ for image data archival, retrieval and distribution
- Model-based diagnosis in a power distribution test-bed
- Model-based diagnosis in a power distribution test-bed
- Modeled and measured dynamics of a composite beam with periodically varying form core
- Modeling and development of a magnetic bearing controller for a high speed flywheel system
- Modeling cyclic phase change and energy storage in solar heat receivers
- Modeling cyclic phase change and energy storage in solar heat receivers
- Modeling of aerobrake ballute stagnation point temperature and heat transfer to inflation gas
- Modeling of crack bridging in a unidirectional metal matrix composite
- Modeling of metal-ferroelectric-semiconductor field effect transistors
- Modeling of thermal lensing in side and end-pumped finite solid-state laser rods
- Modeling of transient heat pipe operation
- Modeling of transient heat pipe operation : semiannual status report
- Modeling of turbulent boundary layer surface pressure fluctuation auto and cross spectra : verification and adjustments based on TU-144LL Data
- Modeling of vortex-induced oscillations based on indicial response approach
- Modeling piezoelectric stack actuators for control of micromanipulation
- Modeling progressive failure of bonded joints using a single joint finite element
- Modeling the fundamental characteristics and processes of spacecraft functioning
- Modeling the oxidation kinetics of continuous carbon fibers in a ceramic matrix
- Modeling visual, vestibular and oculomotor interactions in self-motion estimation : final annual report for NAGW-4127, period covered--5/31/95 - 6/31/96
- Modeling, simulation, and analysis of optical remote sensing systems
- Modification of a macromechanical finite-element based model for impact analysis of triaxially-braided composites
- Modification of a variational objective analysis model for new equations for pressure gradient and vertical velocity in the lower troposphere and for spatial resolution and accuracy of satellite data
- Modification of the SHABERTH bearing code to incorporate RP-1 and a discussion of the traction model
- Multi-dimensional measurements of combustion species in flame tube and sector gas turbine combustors
- Multiphysics modeling of an annular linear induction pump with applications to space nuclear power systems
- NASA AVOSS fast-time wake prediction models : user's guide
- NASA cooperative agreement no. NCC2-958 entitled "Improvement & application of atmospheric radiative transfer models for prediction of the climatic effects of aerosol" : final performance report : time period--September 1, 1996 through December 31, 1997
- NASA-HBCU space science and engineering research forum proceedings
- Neural-net processing of characteristic patterns from electronic holograms of vibrating blades
- Non-linear finite element modeling of THUNDER piezoelectric actuators
- Non-linear finite element modeling of THUNDER piezoelectric actuators
- Nonlinear motion cueing algorithm : filtering at pilot station and development of the nonlinear optimal filters for pitch and roll
- Notched strength allowables and inplane shear strength of AS4/VRM-34 textile laminates
- Numerical modeling of HgCdTe solidification : effects of phase diagram, double-diffusion convection and microgravity level
- Numerical simulation of heat and mass transport during space crystal growth with MEPHISTO
- Numerical simulation of internal heat transfer phenomena occurring during de-icing of aircraft components : final technical report for NASA grant NAG 3-1796
- Numerical simulation of the flow about the F-18 HARV at high angle of attack
- Numerical simulation of vitiation effects on a hydrogen-fueled dual-mode scramjet
- Observational and numerical studies of extreme frontal scale contraction : final report, NASA project NAG 5-2589, July 1, 1994-August 31, 1995
- On central-difference and upwind schemes
- On higher order dynamics in lattice-based models using Chapman-Enskog method
- On increasing the accuracy of MacCormack schemes for aeroacoustic applications : under cooperative agreement NCC3-483
- On multifunctional collaborative methods in engineering science
- On the coupling between a supersonic boundary layer and a flexible surface : final report
- On the finite element implementation of the generalized method of cells micromechanics constitutive model
- On the influence of a fuel side heat-loss ("soot") layer on a planar diffusion flame
- On the numerical formulation of parametric linear fractional transformation (LFT) uncertainty models for multivariate matrix polynomial problems
- On the uncertainty in single molecule fluorescent lifetime and energy emission measurements : technical report 94-03
- One-degree-of-freedom motion induced by modeled vortex shedding
- Operator modeling in commercial aviation : cognitive models, intelligent displays, and pilot's assistants : final report, July 1, 1990 through April 30, 1994
- Optical communication link atmospheric attenuation model
- Optimal routing and control of multiple agents moving in a transportation network and subject to an arrival schedule and separation constraints
- Orion active thermal control system dynamic modeling using simulink/MATLAB
- Outer satellite atmospheres : their extended nature and planetary interactions
- Overview of heat addition and efficiency predictions for an advanced stirling convertor
- Oxygen diffusion and reaction kinetics in continuous fiber ceramic matrix composites
- Oxygen diffusion and reaction kinetics in continuous fiber ceramic matrix composites
- Oxygen permeability and grain-boundary diffusion applied to alumina scales
- Parallel directionally split solver based on reformulation of pipelined Thomas algorithm
- Parametric modeling of the safety effects of NextGen terminal maneuvering area conflict scenarios
- Physiological response of plants grown on porous ceramic tubes : NASA final report, contract #NAG10-112
- Piezoelectric vibration damping study for rotating composite fan blades
- Planetary tectonics and volcanism : summary of research : 4/1/96-9/30/97 : grant number, NAGW-5021
- Plates and shells containing a surface crack under general loading conditions
- Plates and shells containing a surface crack under general loading conditions
- Polarimetric scattering from layered media with multiple species of scatterers
- Porous media and mixture models for hygrothermal behavior of phenolic composites
- Porous media and mixture models for hygrothermal behavior of phenolic composites
- Possible deficiencies in predicting transonic aerodynamics on the X-43A
- Power management and distribution (PMAD) model development : final report
- Practical techniques for modeling gas turbine engine performance
- Preliminary assessment of soil moisture over vegetation
- Preliminary assessment of soil moisture over vegetation : (final report)
- Preliminary structural sensitivity study of hypersonic inflatable aerodynamic decelerator using probabilistic methods
- Probabilistic mesomechanical fatigue model
- Processing of DMSP magnetic data and its use in geomagnetic field modeling
- Proof-term synthesis on dependent-type systems via explicit substitutions
- Protoplanetary formation and the FU Orionis outburst : final technical report on NASA NAGW-3408
- Qualitative models for space system engineering : final report
- Quantitative global heat transfer in a Mach-6 quiet tunnel
- Quasi-static viscoelastic finite element model of an aircraft tire
- Quiet mode for nonlinear rotor models
- Radar scene generation for tactical decision aids : semi-annual report covering the period April 15, 1986 - October 14, 1986
- Radiation-spray coupling for realistic flow configurations
- Rapidly solidified titanium alloys by melt overflow
- Rapidly solidified titanium alloys by melt overflow
- Rare earth optical temperature sensor
- Rare earth optical temperature sensor
- Refinements in a viscoplastic model
- Reliability analysis of continuous fiber composite laminates
- Results of detailed modeling of the narrow-line region of Seyfert galaxies
- Retardation analytical model to extend service life : monthly technical progress narrative, month of August 1984
- Reynolds-averaged Navier-Stokes solutions to flat plate film cooling scenarios
- Robust control of nonlinear flexible multibody systems using quaternion feedback and dissapative compensation
- Robust flutter margin analysis that incorporates flight data
- SMP, a solid modeling program : version 2.0
- SRM propellant and polymer materials structural modeling
- SSME structural dynamic model development : phase II, final report
- STEP and STEPSPL--computer programs for aerodynamic model structure determination and parameter estimation
- Sample data effects of high-pass filters
- Scaling and modeling of three-dimensional, end-wall, turbulent boundary layers
- Scattering models in the microwave regime : final report
- Second International Workshop on Harmonic Oscillators : proceedings of the conference held at Cocoyoc, Morelos, Mexico, March 23-25, 1994
- Secondary flow spanwise deviation model for the stators of NASA middle compressor stages
- Semiannual progress report on real time control for NASA robotic gripper
- Semiconductor superlattice photodetectors : semiannual report for grant no. NAG 1-500, January 1, 1986 to June 30, 1986
- Sensitivity analysis of horizontal heat and vapor transfer coefficients for a cloud-topped marine boundary layer during cold-air outbreaks
- Shielded-twisted-pair cable model for chafe fault detection via time-domain reflectometry
- Shock wave interaction with an abrupt area change
- Simplified analytical model of a six-degree-of-freedom large-gap magnetic suspension system
- Simplified model for solar cosmic ray exposure in manned earth orbital flights
- Simulated dynamic response of a multi-stage compressor with variable molecular weight flow medium
- Simulation model of the integrated flight/propulsion control system, displays, and propulsion system for an ASTOVL lift-fan aircraft
- Simulation of a cold gas thruster system and test data correlation
- Simulation of supersonic jet noise with the adaptation of overflow CFD code and Kirchhoff surface integral
- Simulation tool for dielectric barrier discharge plasma actuators at atmospheric and sub-atmospheric pressures : SBIR phase I final report
- Slew maneuvers of spacecraft control, laboratory experiment (SCOLE) : final report for NASA grant NAG-1-535
- Soft inflation
- Solar thermal upper stage liquid hydrogen pressure control testing and analytical modeling
- Space station electrical power system availability study
- Spark ignition of monodisperse fuel sprays
- Spectral and spectral-element methods : lecture notes in high performance computational physics
- Spectrum orbit utilization program technical manual : SOUP5 version 3.8
- Spreadsheet calculation of jets in crossflow : opposed rows of slots slanted at 45Â°
- Spreadsheet calculations for jets in crossflow : opposed rows of inline and staggered holes and single and opposed rows with alternating hole sizes
- Stability limits of a PD controller for a flywheel supported on rigid rotor and magnetic bearings
- Stability of compactification during inflation
- Stability of finite difference models containing two boundaries of interfaces
- Stochastic model of the NASA/MSFC ground facility for large space structures with uncertain parameters : part II, the maximum entropy approach
- Strain rate dependent deformation and strength modeling of a polymer matrix composite utilizing a micromechanics approach
- Strain rate dependent deformation and strength modeling of a polymer matrix composite utilizing a micromechanics approach
- Strength modeling report
- String fragmentation model in space radiation problems
- Structural and thermal response of 30 cm diameter ion thruster optics
- Studies for the loss of atomic and molecular species from Io : final report for the period: 5/1/93 - 6/30/97, grant no. NAGW-3585
- Summary of mathematical models for a conventional and vertical junction photoconverter
- Supporting technology for the development of controlled ecological life support systems (CELSS) : final report
- Symmetry considerations in the scattering of identical composite bodies
- Synthesis from design requirements of a hybrid system for transport aircraft longitudinal control
- Synthetic bounds for semi-Markov reliability models
- System identification methods for aircraft flight control development and validation
- Taxiing, take-off, and landing simulation of the high speed civil transport aircraft
- Taxiing, take-off, and landing simulation of the high speed civil transport aircraft
- The Numerical Propulsion System Simulation : a multidisciplinary design system for aerospace vehicles
- The calculation of theoretical chromospheric models and the interpretation of solar spectra from rockets and spacecraft
- The cost of conservative synchronization in parallel discrete event simulations
- The effect of nondeterministic parameters on shock-associated noise prediction modeling
- The effects of molecular weight on the single lap shear creep and constant strain rate behavior of thermoplastic polyimidesulfone adhesive
- The effects of structural flap-lag and pitch-lag coupling on soft inplane hingeless rotor stability in hover
- The estimation of material and patch parameters in a PDE-based circular plate model
- The inviscid stability of supersonic flow past a sharp cone
- The large discretization step method for time-dependent partial differential equations
- The mathematical modeling of rapid solidification processing
- The method of complex characteristics for design of transonic blade sections
- The microwave propagation and backscattering characteristics of vegetation
- The microwave propagation and backscattering characteristics of vegetation
- The modeling of piezoceramic patch interactions with shells, plates and beams
- The modelling of the solar upper photosphere and lower chromosphere based upon ATM data
- The numerical analysis of a turbulent compressible jet
- The reduction of lunar regolith by carbothermal processing using methane
- Theoretical analysis of the electron spiral toroid concept
- Thermal barrier coating life prediction model development : phase 1, final report
- Thermocapillary flow with evaporation and condensation at low gravit, Part 2, Deformable surface
- Thermostructural analysis of the SOFIA fine field and wide field imagers subjected to convective thermal shock
- Thermostructural evaluation of joggle region on the shuttle orbiter's wing leading edge
- Third Workshop on Photometry
- To err is normable : the computation of frequency-domain error bounds from time-domain data
- Towards a rational model for the triple velocity correlations of turbulence
- Trade-off analysis report
- Turbulent compressible convection with rotation, II, Mean flows and differential rotation
- Two-equation turbulence models for prediction of heat transfer on a transonic turbine blade
- U. radio emission from quiescent filaments
- Universal parameterization of absorption cross sections : light systems
- Unstructured grid Euler method assessment for longitudinal and lateral/directional aerodynamic performance analysis of the HSR technology concept airplane at supersonic cruise speeds
- Upper bound SEU rate for devices in an isotropic or nonisotropic flux
- User's guide for monthly vector wind profile model
- User's manual for "HPTAM", a two-dimensional heat pipe transient analysis model, including the startup from a frozen state : final report no. UNM-ISNPS-4-1995
- User-defined material model for progressive failure analysis
- Users manual for the improved NASA Lewis ice accretion code LEWICE 1.6
- Using the NASA GRC sectored-one-dimensional combustor simulation
- VAB Sway Investigation
- VORCOR : a computer program for calculating characteristics of wings with edge vortex separation by using a vortex filament and core model
- Verification and improvement of flamelet approach for non-premixed flames : summary report under cooperative agreement no. NCC3-496, with NASA Lewis Research Center; period of implementation--September 1996-August 1997
- Vibration and structureborne noise in space station : progress report for NASA grant NAG-1-541 for the period January 1, 1986 - June 30, 1986
- Vibrations and structureborne noise in space station : progress report for the period July 1, 85 - Dec. 31, 85
- Viscoplastic model development to account for strength differential : application to aged inconel 718 at elevated temperature
- Vision 2040 : a roadmap for integrated, multiscale modeling and simulation of materials and systems
- Water immersion and its computer simulation as analogs of weightlessness
- Weather research and forecasting model wind sensitivity study at Edwards Air Force Base, CA
- Weber number tests in the NASA icing research tunnel
- Welding as science : applying basic engineering principles to the discipline
- Wind-US user's guide

## Embed (Experimental)

### Settings

Select options that apply then copy and paste the RDF/HTML data fragment to include in your application

Embed this data in a secure (HTTPS) page:

Layout options:

Include data citation:

<div class="citation" vocab="http://schema.org/"><i class="fa fa-external-link-square fa-fw"></i> Data from <span resource="http://link.libraries.ou.edu/resource/taJxpCZ1afY/" typeof="CategoryCode http://bibfra.me/vocab/lite/Concept"><span property="name http://bibfra.me/vocab/lite/label"><a href="http://link.libraries.ou.edu/resource/taJxpCZ1afY/">Mathematical models</a></span> - <span property="potentialAction" typeOf="OrganizeAction"><span property="agent" typeof="LibrarySystem http://library.link/vocab/LibrarySystem" resource="http://link.libraries.ou.edu/"><span property="name http://bibfra.me/vocab/lite/label"><a property="url" href="http://link.libraries.ou.edu/">University of Oklahoma Libraries</a></span></span></span></span></div>

Note: Adjust the width and height settings defined in the RDF/HTML code fragment to best match your requirements

### Preview

## Cite Data - Experimental

### Data Citation of the Concept Mathematical models

Copy and paste the following RDF/HTML data fragment to cite this resource

`<div class="citation" vocab="http://schema.org/"><i class="fa fa-external-link-square fa-fw"></i> Data from <span resource="http://link.libraries.ou.edu/resource/taJxpCZ1afY/" typeof="CategoryCode http://bibfra.me/vocab/lite/Concept"><span property="name http://bibfra.me/vocab/lite/label"><a href="http://link.libraries.ou.edu/resource/taJxpCZ1afY/">Mathematical models</a></span> - <span property="potentialAction" typeOf="OrganizeAction"><span property="agent" typeof="LibrarySystem http://library.link/vocab/LibrarySystem" resource="http://link.libraries.ou.edu/"><span property="name http://bibfra.me/vocab/lite/label"><a property="url" href="http://link.libraries.ou.edu/">University of Oklahoma Libraries</a></span></span></span></span></div>`