#
Strains and stresses
Resource Information
The concept ** Strains and stresses** represents the subject, aboutness, idea or notion of resources found in **University of Oklahoma Libraries**.

The Resource
Strains and stresses
Resource Information

The concept

**Strains and stresses**represents the subject, aboutness, idea or notion of resources found in**University of Oklahoma Libraries**.- Label
- Strains and stresses

## Context

Context of Strains and stresses#### Subject of

No resources found

No enriched resources found

- 100-kW metal wind turbine blade basic date, loads and stress analysis
- A Class of solutions of the equations of thermoelastic equilibrium
- A Method of calculating the compressive strength of Z-stiffened panels that develop local instability
- A Reciprocal theorem for linear electrostriction with some applications
- A Semi-graphical method for analyzing strains measured on three or four gage lines intersecting at 45 degrees
- A Study of the stress wave factor technique for the characterization of composite materials
- A circular transducer array for ultrasonic inspection of plates and sheets
- A course on the stresses in bridge and roofs, trusses, arched ribs and suspension bridges
- A critical examination of stresses in an elastic single lap joint
- A finite-element alternating method for two-dimensional mode-I crack configurations
- A force-frequency analysis of tapered cylinders in wind stream
- A laboratory study of the relation of stress to strain for a crushed limestone base material
- A method of calculating stresses in torsion-box covers with cutouts
- A multiple span unsymmetrical rigid gabled frame analyzed by parts
- A numerical method for the stress analysis of stiffened-shell structures under nonuniform temperature distributions
- A photoelastic study of contact stresses in curved surfaces
- A photoelastic study of the influence of non-singular stresses in fracture test specimens
- A preliminary investigation of the tensile properties of beryllium couplings
- A recurrence matrix solution for the dynamic response of aircraft in gusts
- A semi-micromechanic interlaminar strain analysis on curved-beam specimens : final report, April-December 31 1990 under grant NCC 2-673
- A short method of calculating torsional stresses in an airplane fuselage
- A solid-inclusion borehole probe to determine three-dimensional stress changes at a point in a rock mass : development and laboratory testing of a solid-inclusion borehole instrument and the mathematical bases for reduction of the three-dimensional data produced by the instrument
- A structural-efficiency evaluation of titanium at normal and elevated temperatures
- A study of fracture mechanisms in ATD roller bearing
- A study to determine the moments induced in a rigid building frame by unsymmetrical differential settlement of the interior footings
- A suggested design approach for built-up cold-formed columns based on research using nonlinear finite element method
- A summary of diagonal tension, Part 1, Methods and analysis
- A summary of diagonal tension, Part 2, Experimental evidence
- A text-book on the mechanics of materials, and of beams, columns, and shafts
- A total life prediction model for stress concentration sites
- A translation of the stability of elastic equilibrium
- Accelerated reliability engineering : HALT and HASS
- Addendum to the DYCAST user's manual describing the curved, warp beam finite element
- Advanced mechanics of materials
- Advanced mechanics of materials
- Advanced mechanics of materials,
- Advanced mechanics of materials,
- Advanced one-dimensional optical strain measurement system--phase IV
- Advanced strength and applied stress analysis
- Air-gun studies of ferroelectric materials (Second Printing)
- Aircraft structural mechanics,
- Aircraft structures
- Airplane design : a textbook and handbook on airplane and helicopter layout and preliminary design calculations, with emphasis on the economics of design
- Airplane propeller principles,
- Airplane stress analysis; : an introductory treatise,
- Aleatory uncertainty and scale effects in computational damage models for failure and fragmentation
- Allowable bending stresses of wood for use in portable wood ladders
- Allowable compressive stresses for prestressed concrete
- An analysis of free vibration of thin cylindrical shells with rings and stringers treated as discrete elements which may be nonsymmetric, eccentric, and arbitrarily spaced
- An analysis of the measured values for the state of stress in the earth's crust
- An analysis of the wear behavior of SiC whisker reinforced alumnina from 25 to 1200CÌŠ
- An approximate solution for interlaminar stresses in laminated composites
- An assessment of the accuracy of orthotropic photoelasticity
- An effective stress model for ground motion calculations : final report
- An elastic-plastic constitutive relation for transverse-isotropic three-phase earth materials
- An elastic-plastic constitutive relation for transverse-isotropic three-phase earth materials
- An elementary treatise on statically indeterminate stresses,
- An elementary treatise on statically indeterminate stresses,
- An experimental study of arching in sand
- An experimental study of hydraulic fracture propagation in layered rock
- An experimental study of infinitesimal and finite plastic deformation in FCC polycrystalline metals
- An improved numerical method for counterformal contact stress problems
- An improved transverse shear deformation theory for laminated anisotropic plates
- An incremental finite-element determination of stresses around loaded holes in wood plates
- An interferometric strain/displacement measurement system
- An introduction to experimental stress analysis
- An introduction to the theory of elasticity for engineers and physicists
- An introduction to the theory of elasticity for engineers and physicists,
- An investigation of crack-tip stress field criteria for predicting cleavage-crack initiation
- An investigation of the change of electrical resistance, with tensile stress, of certain alloy resistance wires
- An investigation of the creep lifetime of 75S-T6 aluminum-alloy columns
- Analyses of surface cracks in finite plates under tension or bending loads
- Analysis and assessment of major uncertainties associated with ship hull ultimate failure
- Analysis of deep rectangular shear web above buckling load
- Analysis of finite length beams on continuous elastic supports
- Analysis of framed structures,
- Analysis of plane-stress problems with axial symmetry in strain-hardening range
- Analysis of residual stress in bars and tubes with circular cylindrical orthotropy
- Analysis of stress and strain distributions in triaxial tests using the method of finite elements
- Analysis of stresses in bellows
- Analysis of stresses in bellows
- Analysis of tall guyed masts and towers
- Analytical and experimental studies of a beam with a geometric nonlinearity
- Analytical and model studies of the effect of joint distortion on the stresses in a rigid frame
- Analytical methods in bin-load analysis
- Application de la resistance des materiaux au calcul des avions,
- Applied elasticity
- Applied elasticity
- Applied stress analysis
- Approximate stress analysis of multistringer beams with shear deformation of the flanges
- Approximating the stress field within the unit cell of a fabric reinforced composite using replacement elements
- Axial load capacity of cold-formed, built-up members
- Basic structures,
- Beam deflection when I is constant or variable : (supplemented by Tables and Appendix on bending moments)
- Beams on elastic foundation; : theory with applications in the fields of civil and mechanical engineering,
- Behavior of an aluminum structural plate culvert
- Behavior of metals under impulsive loads,
- Bending of rectangular plates with large deflections
- Bending properties of four-layer nail-laminated posts
- Bending stress and frequency calculations for the hearing-pack shaft
- Bending stresses in a truncated wedge supported by an infinite elastic half-space
- Beryllium-clad uranium elements, fabrication development by multi-temperature extrusion, and dimensional stability on thermal cycling
- Bilinear cyclic stress-strain parameters for types 304 and 316 stainless steel
- Boussinesq's problem for a heated punch : I. General Theory
- Boussinesq's problem for a heated punch : I. Solution for a cylindrical punch, II. Solution for a conical punch
- Buckling capacities of axially loaded, cold-formed, built-up members
- Buckling of thin-walled cylinder under axial compression and internal pressure
- Buckling test of a 3-meter-diameter corrugated graphite-epoxy ring-stiffened cylinder
- Calculation of mechanical behavior of materials through true stress-true strain relationships
- Calculation of stress and strain from triaxial test data on undrained soil specimens
- Calculation of thermomechanical fatigue life based on isothermal behavior
- Calculations for a single-strut biplane with reference to the tensions in the wing bracing
- Calibration of strain-gage installations in aircraft structures for the measurement of flight loads
- Charts and approximate formulas for the estimation of aeroelastic effects on the loading of swept and unswept wings
- Charts for calculation of the critical compressive stress for local instability of idealized web- and T-stiffened panels
- Charts for calculation of the critical stress for local instability of columns with I-, Z-, channel, and rectangular-tube section
- Collapse load of a spherical cap
- Collapse of experimental capsules under external pressure
- Comparative analysis of a multiple span unsymmetrical rigid gabled frame
- Comparison of the relative effectiveness of reinforcement around holes in plates
- Compatibility conditions of structural mechanics for finite element analysis
- Compressive buckling of simply supported curved plates and cylinders of sandwich construction
- Compressive strength of flanges
- Compressive tests of a monocoque box
- Computational methods for global/local analysis
- Computer code defect in stress analysis of piping elbow
- Concepts of fracture toughness and structural integrity
- Concrete quality assurance using accelerated strength testing
- Concrete strength and strains
- Concrete structures : stresses and deformations : analysis and design for sustainability
- Contact stresses for closely conforming bodies--application to cylinders and spheres
- Continued observations on the distribution of stress in the vicinity of a crack in the center of a plate : supplement to DMIC memorandum 178
- Continuity in concrete building frames : practical analysis for vertical load and wind pressure
- Correction formulae for the stress distribution in round tensile specimens at neck presence
- Correlation of experimental data with theory for perforated plates with a triangular hole array
- Creep in metals
- Creep of lead at various temperatures
- Creep-fatigue life prediction for different heats of type 304 stainless steel by linear-damage rule, strain-range partitioning method, and damage-rate approach
- Critical combinations of shear and direct axial stress for curved rectangular panels
- Critical combinations of shear and longitudinal direct stress for long plates with transverse curvature
- Critical combinations of torsion and direct axial stress for thin-walled cylinders
- Critical stress for an infinitely long flat plate with elastically restrained edges under combined shear and direct stress
- Critical stress of ring-stiffened cylinders in torsion
- Critical stress of thin-walled cylinders in torsion
- Critical-stress of thin-walled cylinders in axial compression
- Cyclic strain fatigue of Inconel at 75 to 600Â°F
- Cyclic torsion testing
- Cylindrical shells : application of the theory of elasticity and the theory of rupture to the design of cylindrical roofs, tanks, tubes, pipe lines, and other thin-walled cylindrical structures
- DESAP 1: : a structural design program with stress and displacement constraints
- Damping technologies for tall buildings : theory, design guidance and case studies
- Damping technologies for tall buildings : theory, design guidance and case studies
- Deflection and stress analysis of thin solid wings of arbitrary plan form with particular reference to delta wings
- Deflections and statically indeterminate stresses
- Deformation analysis of wing structures
- Deformation criteria for yield-line analysis of reinforced microconcrete slab systems, phase I
- Deformations and stresses in circular cylindrical shells caused by pipe attachment, Part VII, Work charts for off-center loading
- Derivation of equations for the stresses and strains in a cylindrical viscoelastic case-bonded grain
- Description of stress-strain curves by three parameters
- Design against blast : load definition & structural response
- Design of concrete beams for torsion : a design aid
- Design of concrete structures using high-strength steel reinforcement
- Design of concrete structures using high-strength steel reinforcement
- Design of concrete structures with stress fields
- Design of multiple-ply laminated composite tapered beams
- Design of piping systems
- Designing against fatigue of metals
- Designing by photoelasticity
- Determination of strain rates in ship hull structures : a feasibility study
- Determination of the in situ state of stress at the Spent fuel test-Climax site, Climax stock, Nevada test site
- Determining bridge responses to overweight loads / submitter: Bridge Diagnostics, Inc. ; Jeffrey L. Schulz, Brett C. Commander, George G. Goble
- Development of a plan to obtain in-service still water bending moment information for statistical characterization
- Development of an NBS polymer gage for dynamic soil stress measurement
- Development of non-linear finite element computer code : final report to California Institute of Technology, Jet Propulsion Laboratory
- Die Statik im Flugzeugbau,
- Direct method of design and stress analysis of rotating disks with temperature gradient
- Discontinuity stresses in shells general model
- Dissipation of mechanical work and temperature rise in AS4/PEEK thermoplastic composite
- Distribution of deformation : (a new method of structural analysis)
- Distribution of load stresses in highway bridges
- Douglas fir use book
- Dynamic buckling of an axially compressed cylindrical shell with discrete rings and stringers
- Dynamic loading on parallel shaft gears
- Dynamic response of materials to intense impulsive loading.
- Economics of construction in relation to framed structures
- Effect of carburization on the low strain rate behavior of type 304 stainless steel : interim report
- Effect of centrifugal force on the elastic curve of a vibrating cantilever beam
- Effect of combined stress on yield and fracture behavior of zircaloy-2
- Effect of high shear rate on erosion of common bearing metals
- Effect of hydrogen on the strain fatigue properties of zircaloy-2 weld metal
- Effect of loading rate on the stress-strain characteristics of a clay shale in unconsolidated-undrained triaxial compression
- Effect of normal pressure on the critical compressive and shear stress of curved sheet
- Effect of normal pressure on the critical compressive stress of curved sheet
- Effect of shear stress on dynamic bulk modulus of sand
- Effect of shear stress on dynamic bulk modulus of sand
- Effect of stress variation on Biot's coefficient
- Effects of axial restraint on length change of expanding mortar bars
- Effects of boundary friction on transmission of static stress through sand in cylindrical tanks
- Effects of static tensile load on the thermal expansion of Gr/PI composite material
- Elastic response to blast loading of strain-rate dependent cantilevers
- Elastic-plastic characterization of a cast stainless steel pipe elbow material
- Elastic-plastic finite element method of plane stress
- Elastic-plastic finite-element analysis of thermally cycled double-edge wedge specimens
- Elasticity and strength
- Elasticity in engineering
- Elasticity, fracture and flow, : with engineering and geological applications
- Electro optical system to measure strains at high temperature : final report
- Elementary reinforced concrete design for students of architecture and building
- Elementary stress analysis
- Elementary theory and design of flexural members,
- Elements of elastic strength of guns, text book for use of student officers at U.S. Artillery School
- Elements of experimental stress analysis,
- Elements of stress analysis
- Elevated-temperature compressive stress-strain data for 24S-T3 aluminum-alloy sheet and comparisons with extruded 75S-T6 aluminum alloy
- Engineering mechanics
- Engineering mechanics
- Engineering structural failures; : the causes and results of failure in modern structures of various types.
- Environmental and strain rate effects on graphite/epoxy composites
- Equipment and test procedure for determining multiaxial tensile and combined tensile-compressive strength of concrete
- Evaluation of load carrying capacity of bridges : a report
- Evaluation of nonlinear resilient moduli of unbound granular materials from accelerated traffic test data
- Evaluation of prestress cable strain in multiple beam configurations / Jeffrey A. Frantzen, David A. Meggers, David G. Alt, Christopher R. Wilkens
- Evaluation of sample disturbance on soils using the concept of "reference strain"
- Evaluation of sample disturbance on soils using the concept of "reference strain"
- Evolution of allowable stresses in shear for lumber
- Examination of service and stress data of three ships for development of hull girder load criteria
- Experimental and analytical analysis of stress-strain behavior in a [90/ÌŠ0]ÌŠs, SiC/Ti-15-3 laminate
- Experimental evaluation of stress concentration and intensity factors : useful methods and solutions to experimentalists in fracture mechanics
- Experimental investigation of the effects of plastic flow in a tension panel with a circular hole
- Experimental measurement of deflections and strains in a spur gear tooth
- Experimental stress analysis
- Experimental stress analysis and motion measurement: : theory, instruments and circuits, techniques
- Experimental stress analysis of a circular bubble chamber window with a beveled mounting
- Experimental stress analysis: principles and methods,
- Experiments with fabrics for covering airplane wings, to determine effect of method of installation
- Failure of materials in mechanical design : analysis, prediction, prevention
- Fatigue life analysis for traction drives with application to a toroidal type geometry
- Fatigue of materials and structures, Application to damage and design
- Fiber-reinforced wood composites
- Field repair of composite structural components
- Finite element analysis of the 2240 MW HTGR PCRV
- Flat sheet metal girder with very thin metal web : Part 3 : Sheet metal girders with spars resistant to bending - the stress in uprights - diagonal tension fields
- Flexural characteristics of radially loaded cylindrical shells with stiffening rings
- Flugzeugstatik,
- Folding and fracturing of rocks
- Formulas for stress and strain
- Formulas for stress and strain,
- Formulas for stress and strain,
- Foundation investigations, NASA Mississippi Test Facility : report 2 : static load testing of foundation piles at test stand S-II, AI
- Fracture control for fixed offshore structures
- Fracture toughness data for brittle materials
- Fracturing of metals; : a seminar on the fracturing of metals held during the Twenty-ninth National Metal Congress and Exposition, Chicago, October 18 to 24, 1947 ...
- Fringes : a visual approach to the understanding of structures
- Fundamental study of creep-rupture under combined stress
- Fundamentals of aircraft structures
- Fundamentals of seismic loading on structures
- Fundamentals of strength : principles, experiment, and applications of an internal state variable constitutive formulation
- Fundamentals of stress analysis,
- Fundamentals of stress analysis,
- General theory of shells and its application in engineering
- Geological strain analysis : a manual for the RF/0 method
- Global/local stress analysis of composite panels
- Global/local stress analysis of composite structures
- Gravitational stresses in a disk supported at the ends of the horizontal diameter
- Gripped-end effect in tension proof testing of dimension lumber
- Gross panel strength under combined loading
- Handbook of frame constants : beam factors and moment coefficients for members of variable section
- Handbook of rigid frame analysis,
- Handbook of stress and strength: : design and material applications
- Handbook of structural stability, Part 1, Buckling of flat plates
- Handbook of structural stability, Part 2, Buckling of composite elements
- Handbook of structural stability, Part 3, Buckling of curved plates and shells
- Handbook of structural stability, Part 4, Failure of plates and composite elements
- Handbook of structural stability, Part 5, Compressive strength of flat stiffened panels
- Handbook of structural stability, Part VI, Strength of stiffened curved plates and shells
- Heavy water components test reactor : Savannah River Plant : stress analysis of the reactor vessel
- High strain rate behavior of nanocomposites and nanocoatings
- High strain rate properties of angle-ply composite laminates, Part III, final report
- High strain rate properties of off-axis composite laminates : final report, Part II
- High temperature strain measurement with a resistance strain gage [microform]
- High-temperature-strain fatigue testing with a modified direct-stress fatigue machine
- Hydrogen-induced delayed cracking, 1, Strain energy effects on hydrogen solubility
- Hydrostatic test of an airship model
- Improving the distribution and reducing the magnitude of pavement damage
- In situ stresses in rock, Rainier Mesa, Nevada test site
- In-situ strees project, technical report number 6 : results of hydraulic fracturing stress measurements at Jianchuan, western Yunnan Province, China
- Incorporating grillage model derived load distribution factors into ratings of prestressed concrete bridges
- Inelastic lateral-torsional buckling of eccentrically loaded wide-flange columns
- Inelastic strain analysis of solder joint in NASA fatigue specimen : final report
- Inelastic strain analysis of solder joint in NASA fatigue speciment : final report
- Inelastic stress in a long cylindrical shell under a band of pressure
- Inelasticity of materials : an engineering approach and a practical guide
- Influence of alloying upon grain-boundary creep
- Influence of elastic properties on the stresses in bolted joints in wood
- Influence of juvenile wood content on shear parallel, compression, and tension transverse to grain strength and mode I fracture toughness for loblolly pine
- Instability phenomena in thin-walled cylinders
- Introduction to electrical-circuit analogies for beam analysis
- Introduction to finite strain theory for continuum elasto-plasticity
- Introduction to finite strain theory for continuum elasto-plasticity
- Introduction to stress analysis
- Introduction to the theoretical and experimental analysis of stress and strain
- Introduzione alla teoria della elasticitÃ : meccanica dei solidi continui in regime lineare elastico
- Investigation of K0 testing in cohesionless soils : final report
- Investigation of influence of chemical composition on forged modified low-carbon N-155 alloys in solution-treated and aged condition as related to rupture properties at 1200Â° F
- Isodyne stress analysis
- Join computer program
- Laboratory investigation of rigid frame failure / by R.C. Elstner and E. Hognestad
- Laboratory investigation of soft railroad subgrade behavior under repeated load applications
- Laboratory testing of a weathered shale using cubical and triaxial devices
- Lateral elastic instability of hat-section stringers under compressive load
- LeÃ§ons de mÃ©canique pratique : rÃ©sistance des matÃ©riaux
- Life prediction of thermomechanical fatigue using total strain version of strainrange partitioning (SRP) : a proposal
- Light airplane crash tests at three pitch angles
- Light airplane crash tests at three rolls angles
- Limit states of materials and structures : direct methods
- Linear elastic fracture mechanics primer
- Load carriage in military operations : a review of historical, physiological, biomechanical, and medical aspects
- Loading rate effects on compressibility of sand : final report
- Local changes in the gravity and magnetic field due to tectonic strain
- Local instability of centrally loaded columns of channel section and Z-section
- Local loads in plates and shells
- Local strain redistribution corrections for a simplified inelastic analysis procedure based on an elastic finite-element analysis
- Local strain redistribution corrections for a simplified inelastic analysis procedure based on an elastic finite-element analysis
- Low strain long life creep-fatigue of AF2-1DA and INCO 718
- Machine stress rating : practical concerns for lumber producers
- Manual of engineering stress analysis
- Manual on experimental stress analysis
- Manual on experimental stress analysis techniques
- Manual on experimental stress analysis.
- Material properties and stress analysis in biomechanics
- Materials constitutive modes for nonlinear analysis of thermally cycled structures
- Mean and tolerance limit stresses and stress modeling for compression perpendicular to grain in hardwood and softwood species
- Measuring soil properties in vehicle mobility research : report 2 : an evaluation of the rectangular hyperbola for describing the load-deformation response of soils
- Mechanical behavior of engineering materials
- Mechanical stress on the nanoscale : simulation, material systems and characterization techniques
- Mechanics of finite deformation and fracture
- Mechanics of material forces
- Mechanics of material forces
- Mechanics of materials
- Mechanics of materials
- Mechanics of materials : an introduction to the mechanics of elastic and plastic deformation of solids and structural materials, 2
- Mechanics of materials and interfaces : the disturbed state concept
- Mechanics of metals
- Mechanics of solids, : with applications to thin bodies
- Mechanisms of failure of high nickel-alloy turbojet combustion liners
- Mehrstielige Rahmen, : Gebrauchsfertige Formeln zur Berechnung mehrfach statisch umbestimmter rahmenartiger Stabsysteme, als Hilfsmittel fur den entwerfenden Ingenieur und fur den Konstruktionstisch
- Method analyzes analogue plots of paperboard stress-strain data
- Methodology for design and construction of drilled shafts in cohesive soils
- Methods for determining in situ deformation of rock masses
- Micromechanical combined stress analysis : MICSTRAN, a user manual
- Minimum design loads and associated criteria for buildings and other structures
- Minimum design loads for buildings and other structures
- Minimum design loads for buildings and other structures
- Mixed finite element models for free vibrations of thin-walled beams
- Model studies of tectonic stress fields and faulting
- Model test for stresses and deflections in the N.S. Savannah reactor vessel model and attachments
- Modeling and estimation of structural damage
- Modern experimental stress analysis : completing the solution of partially specified problems
- Modern experimental stress analysis : completing the solution of partially specified problems
- Modern timber engineering
- Modern timber engineering,
- Modern timber engineering,
- Mohr circles, stress paths and geotechnics
- Moire analysis of strain
- Moire fringes in strain analysis,
- Monitoring stress changes along active faults in southern California
- Multi-scale modelling of composite material systems : the art of predictive damage modelling
- Multiple-bolted joints in wood members : a literature review
- Multiple-mode nonlinear free and forced vibrations of beams using finite element method
- Nondestructive measurement of longitudinal rail stresses
- Nonlinear first approximation thin shell and membrane theory
- Numerical analysis of displacements in plane elasticity
- Numerical solution of reactor stress problems
- Observations of dynamic strain aging in polycrystalline NiAl
- Old River low-sill control structure :, report 1, Downpull forces on vertical-lift gates : hydraulic model investigation
- On the stability of elastic equilibrium : Over de stabiliteit van het elastisch evenwicht
- Online, interactive, 3D finite element stress analysis using high-performance computing cluster
- Packer induced stresses during hydraulic well fracturing
- Permeability and triaxial tests of lean mass concrete
- Photoelastic analysis of stresses in a Place Bolt head
- Photoelastic studies of crack propagation and crack arrest
- Photoelastic studies of crack propagation and crack arrest in polymers and 4340 steel
- Pipe stress engineering
- Piping stress calculations simplified,
- Plastic design of portal frames
- Plasticity for mechanical engineers
- Plasticity; : a mechanics of the plastic state of matter,
- Poroelastic response of a hollow cylinder in a non-hydrostatic stress field
- Practical stress analysis in engineering design
- Practical stress analysis in engineering design
- Practical wind bracing; : a book containing easy and rapid methods of figuring wind stresses in high buildings,
- Predicted and measured strain responses of isotropic panels to base excitation
- Prediction of dimensional changes in uranium fuel elements during irradiation : the elastic solution : interim report
- Preliminary investigation of the failure of pressurized stiffened cylinders
- Preliminary investigation of the structural influence of entry-entry intersections and inhomogeneous initial stress fields on repository disposal rooms
- Preliminary investigation of the structural influence of entry-entry intersections and inhomogeneous intial stress fields on repository disposal rooms
- Preliminary report on prototype in-situ stress testing for the Yucca Mountain project, Nevada
- Preliminary results of stability calculations for the bending of box beams with longitudinally stiffened covers connected by posts
- Pressure and thermal stresses at a pipe attachment to a sphere
- Pressure loads produced on a flat-plate wing by rocket jets exhausting in a spanwise direction below the wing and perpendicular to a free-stream flow of Mach number 2.0
- Pressures, forces and moments, and shock shapes for a geometrically matched sphere-cone and hyperboloid at Mach 20.3 in helium
- Prevention of the failure of metals under repeated stress : a handbook prepared for the Bureau of Aeronautics, Navy Department
- Prevention of the failure of metals under repeated stress, : a handbook prepared for the Bureau of Aeronautics, Navy Department,
- Principles of moment distribution applied to stability of structures composed of bars or plates
- Proceedings
- Proceedings of a workshop on nondestructive evaluation of residual stress : held at San Antonio, Texas, August 13-14, 1975
- Proceedings of the International Conference on Fatigue of Metals, London, 10th-14th September 1956, New York, 28th-30th November 1956
- Process vessels subject to explosion risk : design guidelines for the pressure rating of weak process vessels subject to explosion risk
- Process vessels subject to explosion risk : design guidelines for the pressure rating of weak process vessels subject to explosion risk
- Propeller design, IV, A simple method for determining the strength of propellers
- Puncture of shielded radioactive material shipping containers
- Rail-wheel geometry associated with contact stress analysis
- Rectangular shell plating under uniformly distributed hydrostatic pressure
- Reference stress methods : analysing safety and design
- Relation of rib spacing to stress in wing planes
- Relaxation methods in engineering science : a treatise on approximate computation
- Relaxation methods in engineering science; : a treatise on approximate computation,
- Relaxation spectrometry
- Reliability based analysis of contact problems
- Reliability considerations for the total strain range version of strainrange partitioning
- Reliability considerations for the total strain range version of strainrange partitioning
- Remarks on the elastic axis of shell wings
- Repair of heat exchangers damaged by stress corrosion : Savannah River Plant
- Residual stress measurements,
- Residual stresses in cambered steel beams
- Residual stresses in metals and metal construction
- Residual stresses in natural uranium fuel
- Response of deep two-way-reinforced and unreinforced concrete slabs to static and dynamic loading : report 4 : Mine Shaft Series, Mine Under Event, Program 3, structural response, deep-slab tests
- Response of deep two-way-reinforced and unreinforced concrete slabs to static and dynamic loading : report 6 : Mine Shaft Series, Mineral Rock Event, Program 3, structural response studies, deep-slab tests, Phase 2
- Response of deep two-way-reinforced and unreinforced concrete slabs to static and dynamic loading : report 7 : static tests of deep slabs having various span-to-thickness ratios
- Response of deep two-way-reinforced and unreinforced concrete slabs to static and dynamic loading : report 9 : summary report
- Response of deep two-way-reinforced and unreinforced concrete slabs to static and dynamic loading, report 1, Review of the literature and nuclear weapons effects pertaining to deep slabs
- Response of deep two-way-reinforced and unreinforced concrete slabs to static and dynamic loading, report 2, The dynamic response of deep slabs Project Hercules
- Response of deep two-way-reinforced and unreinforced concrete slabs to static and dynamic loading, report 3, Static tests of deep slabs having a span-to-thickness ratio of 4.12
- Response of deep two-way-reinforced and unreinforced concrete slabs to static and dynamic loading, report 5, Static tests of deep square composite slabs
- Response of horizontally oriented buried cylinders to static and dynamic loading
- Rigid frame formulas; : explicit formulas of all statical quantities for those single-panel frames which occur in practical steel, reinforced concrete, and timber construction.
- Rigid frame formulas; : explicit formulas of all statical quantities for those single-panel frames which occur in practical steel, reinforced concrete, and timber construction.
- Robust speckle metrology techniques for stress analysis and NDT
- Robust structural design against self-excited vibrations
- Rock fracture under stress gradients
- Seal-shell-2 : a computer program for the stress analysis of a thick shell of revolution with axisymmetric pressures, temperatures, and distributed loads
- Secondary stresses in bridge trusses,
- Selected papers on stress analysis, : presented at the Institute of Physics Stress Analysis Group Conference, Delft, 1959
- Shear strengthening of pretensioned prestressed concrete composite flexural members
- Shear-lag tests of a box beam with a highly cambered cover in tension
- Significant changes to the minimum design load provisions of ASCE 7-16
- Simple formulas for strain-energy release rates with higher order and singular finite elements
- Simplified composite micromechanics for predicting microstresses
- Simplified design of roof trusses for architects and builders
- Simplified design of roof trusses for architects and builders,
- Simplified design of structural timber
- Simplified design of structural timber
- Simplified formulas and tables for floors, joists and beams; roofs, rafters and purlins,
- Slow crack growth and fracture toughness of sapphire for the International Space Station Fluids and Combustion Facility
- Solution of beam problems by biharmonic polynomials which separate the effects of boundary shears and boundary normal stresses
- Solution of elastic-plastic stress analysis probems by the p-version of the finite element method
- Some elementary principles of shell stress analysis with notes on the use of the shear center
- Some investigations of the general instability of stiffened metal cylinders, IX, Criterions for the design of stiffened metal cylinders subject to general instability failures
- Some investigations of the general instability of stiffened metal cylinders, VIII, Stiffened metal cylinders subjected to pure torsion
- Some isoperimetric inequalities in the torsion problem for multiply-connected regions
- Some observations of the distribution of stress in the vicinity of a crack in the center of a plate
- Some observations on loss of static strength due to fatigue cracks
- Some simplified solutions for relatively stiff beams on elastic foundations
- Spartan release engagement mechanism (REM) stress and fracture analysis
- Stability of boreholes in a transversely isotropic geologic medium
- Statics and kinematics of granular materials
- Statics and strength of materials for architecture and building construction
- Statics and strength of materials for architecture and building construction
- Statics and strength of materials for architecture and building construction
- Statistical analysis of the rate of strain tensor in compressible homogeneous turbulence
- Strain effect in semiconductors : theory and device applications
- Strain facies
- Strain mechanisms in lead-free ferroelectrics for actuators
- Strain rate and inertial effects on impact loaded single-edge notch bend specimens
- Strain-engineered MOSFETs
- Strain-gage study of internally cooled exhaust valves having various throat designs
- Strain-induced effects in advanced MOSFETs
- Strength and elasticity of structural members
- Strength and stiffness of large-gap metal-plate wood connections
- Strength of materials for technology
- Strength of materials,
- Strength of materials; : a first course
- Strength of metals under combined stresses.
- Strength of tubing under combined axial and transverse loading
- Strength tests of thin-walled duralumin cylinders in pure bending
- Stress analysis and design of elementary structures
- Stress analysis and design of elementary structures
- Stress analysis for airplane draftsmen,
- Stress analysis for creep
- Stress analysis of HNPF loading-face shield
- Stress analysis of a pressure-vessel head with square holes
- Stress analysis of circular semimonocoque cylinders with cutouts by a perturbation load technique
- Stress analysis of polymers
- Stress analysis of safety-related piping
- Stress analysis of selected I-bars using the finite element method
- Stress analysis of structures by joint rotation & deflections
- Stress analysis of the space telescope focal plane structure joint : bi-monthly progress report, March 1, 1985 through April 30, 1985
- Stress analysis; : recent developments in numerical and experimental methods.
- Stress and deformation : a handbook on tensors in geology
- Stress and distortion analysis of a swept box beam having bulkheads perpendicular to the spars
- Stress and strain concentration at a circular hole in an infinite plate
- Stress calculations of group II-A fluoride on semiconductor structure
- Stress concentration around circular hole in a composite material specimen representative of the X-29A forward-swept wing aircraft
- Stress concentration around holes
- Stress distribution around resin grouted bolts
- Stress distributions caused by three types of loading on a circular semimonocoque cylinder with flexible wings
- Stress field of the Earth's crust
- Stress in ASME pressure vessels, boiler and nuclear components
- Stress in ASME pressure vessels, boiler and nuclear components
- Stress in ASME pressure vessels, boiler and nuclear components
- Stress in the vicinity of a crack in a thick elastic plate
- Stress intensity of delamination in a sintered-silver interconnection : preprint
- Stress problems in pressurized cabins
- Stress relaxation in stainless steel during irradiation
- Stress resultants and out-of-plane deformations in stiff rings attached to elastic cylinders and subject to concentrated loads
- Stress transients in solids
- Stress waves through projectile joints and interfaces
- Stress, strain, and structural dynamics : an interactive handbook of formulas, solutions, and MATLAB toolboxes
- Stress, strain, and structural dynamics : an interactive handbook of formulas, solutions, and MATLAB toolboxes
- Stress, temperature, and time combined in the treatment of metals
- Stress-life relation of the rolling-contact fatigue spin rig
- Stress-rupture parameters: origin, calculation, and use,
- Stress-strain analysis of a [0/90]2s titanium matrix laminate subjected to a generic hypersonic flight profile
- Stress-strain behavior of elastic materials: selected problems of large deformations,
- Stress-strain characteristics and slip band formation in metal crystals
- Stress-strain-temperature-time relationships for refractory materials
- Stresses and strains : their calculation and that of their resistances, by formulae and graphic methods
- Stresses and strains developed by the reflection of seismic waves at a free surface
- Stresses around rectangular cut-outs in skin-stringer panels under axial loads - II
- Stresses in a semi-infinite thin-walled cylinder caused by an exponential temperature distribution
- Stresses in and general instability of monocoque cylinders with cutouts : 7- Experimental investigation of cylinders having either long bottom cutouts or series of side cutouts
- Stresses in beams, plates, and shells
- Stresses in framed structures
- Stresses in framed structures,
- Stresses in hexagonal tubes
- Stresses in rings
- Stresses in rings deformed out of their planes
- Stresses in rings, Part II
- Stresses in shells of revolution,
- Stresses in simple structures,
- Stresses in steel curved girder bridges / Theodore V. Galambos, Jerome F. Haijar, Roberto T. Leon, Wen-Hsen Huang, Brian E. Pulver, Brian J. Rudie
- Stresses in thick slabs subjected to thermal loadings
- Stresses statically determined,
- Structural analysis of the ANP concentric ring fuel element
- Structural and stress analysis
- Structural and stress analysis
- Structural bearings
- Structural frameworks
- Structural response in a noise environment
- Structural safety during curved flight
- Structural testing and design considerations of flexure rods and strain gage beams
- Structure design notes : calculation of stresses, forces, and deflections in linear-elastic skeleton structures with temperature, pressures, applied loads and redundant loads
- Structures primer
- Studies in elastic structures
- Subscale static tests, closure analysis and test program : report 1 : data report for first-phase tests
- Subscale static tests, closure analysis and test program : report 2 : data report for second-phase tests
- Subsurface accelerations and strains from an underground detonation, Part II
- Surface cracks in a plate of finite width under tension or bending
- Symposium on determination of elastic constants, : presented at the fifty-fifth annual meeting (fiftieth anniversary meeting) American Society for Testing Materials, New York, N.Y., June 25, 1952
- Symposium on fatigue of aircraft structures, : presented at the third Pacific area national meeting, San Francisco, Calif., October 14-15, 1959
- Tables of self-equilibrating functions and some applications