#
Heat -- Transmission
Resource Information
The concept ** Heat -- Transmission** represents the subject, aboutness, idea or notion of resources found in **University of Oklahoma Libraries**.

The Resource
Heat -- Transmission
Resource Information

The concept

**Heat -- Transmission**represents the subject, aboutness, idea or notion of resources found in**University of Oklahoma Libraries**.- Label
- Heat -- Transmission

- Authority link
- http://id.worldcat.org/fast/00953826

- Source
- fast

## Context

Context of Heat -- Transmission#### Subject of

No resources found

No enriched resources found

- A discussion of methods for reducing aerodynamic heating in supersonic flight
- A problem in self-heating of a spherical body
- APPLICATIONS OF HEAT, MASS AND FLUID BOUNDARY LAYERS
- Advanced OMR coolant screening and boiling test loops
- Advanced thermal design of electronic equipment
- Advances in cold-region thermal engineering and sciences : technological, environmental, and climatological impact : proceedings of the 6th international symposium held in Darmstadt, Germany, 22-25 August, 1999
- Advances in heat transfer enhancement
- Air flow management in raised floor data centers
- An experimental study of sodium pool boiling heat transfer
- An up-to-date review of the principles of heat transfer, with particular application to nuclear power
- Analysis of check valve disc motion during a flow transient
- Analysis of tool heating problem
- Analysis of turbulent heat transfer and flow in the entrance regions of smooth passages
- Analytical heat and fluid flow in microchannels and microsystems
- Analytical investigation of turbulent flow in smooth tubes with heat transfer with variable fluid properties for Prandtl number of 1
- Analytical methods for heat transfer and fluid flow problems
- Applications of nanofluid transportation and heat transfer simulation
- Approximate calculation of the temperature distribution surrounding coolant holes in a heat generating solid with finite value of fluid heat transfer coefficient
- Basic experimental studies on boiling fluid flow and heat transfer at elevated pressures for month of ..
- Bibliography on two-phase heat transfer
- Blade-to-coolant heat-transfer results and operating data from a natural-convection water-cooled single-stage turbine
- Boiling-water void distribution and slip ratio in heated channels : final report to Joint U.S.-Euratom Research and Development Board
- CVR pressurizer simulator study
- Calculation of surface temperatures in steady supersonic flight
- Charge and heat transport phenomena in electronic and spin structures in B20-type compounds
- Comparative effectiveness of a convection-type and a radiation-type cooling cap on a turbosupercharger
- Condensation of metal vapors: mercury and the kinetic theory of condensation
- Convective heat transfer from rotating disks subjected to streams of air
- Correlation of turbulent heat transfer in a tube for the dissociating system N204 reversibly yields 2N02
- Critical heat flux in flow boiling in microchannels
- Design and operation of a sodium-to-lithium-to air heat transfer system
- Design basis for critical heat flux condition in boiling water reactors
- Determination of blade-to-coolant heat-transfer coefficients on a forced-convection, water-cooled, single-stage turbine
- Determination of burnout limits of polyphenyl coolants : research and development report
- Determination of burnout limits of polyphenyl coolants : summary report
- Determination of gas-to-blade convection heat-transfer coefficients on a forced-convection, water-cooled single-stage aluminum turbine
- Determination of turbulent thermal diffusivities for flow of liquids in pipes
- Development of ferritic steels for high temperature sodium service, Part I, 2.25 CR - 1 Mo - 0.4 Cb - 0.4 Ti experimental alloy
- Diffusion of heat from a line source in isotropic turbulence
- Effect of blade-tip crossover passages on natural-convection water-cooling of gas-turbine blades
- Effect of chord size on weight and cooling characteristics of air-cooled turbine blades
- Effect of diameter of closed-end coolant passages on natural-convection water cooling of gas-turbine blades
- Effect of fluid properties on mass transfer in the gas phase
- Effect of gas entrainment on the heat transfer characteristics of mercury under turbulent flow conditions : final report
- Effect of wetting on heat transfer characteristics of liquid metals : (thesis)
- Effects of heat generation and heat removal on HRT shutdown and dump
- Engineering flow and heat exchange
- Evaluation and performance of once-through, zero-gravity boiler tubes with two-phase water
- Ex-reactor determination of thermal gap conductance between uranium dioxide and zircaloy-4 : stage II, high gas pressure
- Exact solutions of laminar-boundary-layer equations with constant property values for porous wall with variable temperature
- Experimental and theoretical geophysics : steady heat flux through an inclined plane of arbitrary height and slope angle and its application to geothermal measurements, The effect of two-dimensional topography on superficial thermal gradients
- Experimental convective heat transfer to a 4-inch and 6-inch hemisphere at Mach numbers from 1.62 to 3.04
- Experimental investigation of the heat-transfer characteristics of an air-cooled sintered porous turbine blade
- Experimental results of forced convection boiling potassium heat transfer and pressure drop tests
- Externally Heated Valve Engine : a New Approach to Piston Engines
- Fast reactor rocket engines--heat transfer
- Fast scanning calorimetry
- Final report on studies in boiling heat transfer
- Final report on the gas-suspension coolant project
- Flow boiling in microgap channels : experiment, visualization and analysis
- Fluid flow and heat transfer in rotating porous media
- Forced convection heat transfer characteristics of polyphenyl reactor coolants
- Forced convection heat transfer in pipes with volume heat sources within the fluids
- Free convection in narrow vertical liquid metal annuli
- Free-flight measurements of aerodynamic heat transfer to Mach number 3.9 and of drag to Mach number 6.9 of a fin-stabilized cone-cylinder configuration
- Frontiers in heat and mass transfer
- Fundamentals of the finite element method for heat and mass transfer
- Further experiments on the flow and heat transfer in a heated turbulent air jet
- Gas replenishment techniques for use in high-altitude, long-duration scientific balloon flights
- Graphical solutions of the non-boiling and surface boiling heat transfer equations
- HECTIC : an IBM 704 computer program for heat transfer analysis of gas-cooled reactors
- HRP-CP : heat removal from a proposed hydroclone underflow pot geometry for a volume heat source
- HRT space cooler heat load
- Heat Transfer in Fluidized Beds
- Heat and mass transfer
- Heat and mass transfer : WÃ¤rme- und StoffÃ¼bertragung
- Heat and mass transfer in a turbine contactor
- Heat capacity and magnetic susceptibility of thulium ethylsulfate
- Heat flow in the trigger of a reactor safety device
- Heat removal systems for the HRT pressure vessel
- Heat transfer - Asian research
- Heat transfer : a bibliography of unclassified report literature
- Heat transfer across annuli in gas bonded uranium dioxide fuel elements
- Heat transfer and burnout to water at high subcritical pressures
- Heat transfer and pressure drop for a gas at high temperature : technical report 247-2
- Heat transfer and pressure drop in eccentric annuli
- Heat transfer and pressure loss in proposed ORR fuel assemblies
- Heat transfer and pressure measurement on a 5-inch hemispherical concave nose at a Mach number of 2.0
- Heat transfer burnout of a surface contacted by a spacer rib
- Heat transfer by natural convection from horizontal cylinders to liquid metals : final report for July 1, 1949 to June 30, 1950
- Heat transfer coefficients with annular flow during "one-through" boiling water to 100 per cent quality at 800, 1100, 1400 PSI
- Heat transfer from high-temperature surfaces to fluids, [Part] 1, Preliminary investigation with air in inconel tube with rounded entrance, inside diameter of 0.4 inch and length of 24 inches
- Heat transfer from high-temperature surfaces to fluids, [Part] 2, Correlation of heat-transfer and friction data for air flowing in inconel tube with rounded entrance
- Heat transfer from parallel rods in axial flow
- Heat transfer in forced convection film boiling
- Heat transfer measurements in connection with thermal insulation of low-cost housing
- Heat transfer on an afterbody immersed in the separated wake of a hemisphere
- Heat transfer research
- Heat transfer to blunt nose shapes with laminar boundary layers at high supersonic speeds
- Heat transfer to bodies at angles of attack
- Heat transfer to boiling water forced through a uniformly heated tube
- Heat transfer to lead-bismuth and mercury in laminar and transistor pipe flow
- Heat transfer, Japanese research
- Heat transfers and related effects in supercritical fluids
- Heat transfers in polymer composite materials : forming processes
- Heat, mass, and momentum transfer for flow over a flat plate with blowing or suction
- Heat-transfer characteristics of blunt two-and three-dimensional bodies at supersonic speeds
- Heat-transfer measurements in free flight at Mach numbers up to 14.6 on a flat-faced conical nose with a total angle of 29Â°
- Heat-transfer processes in liquid-cooled engine cylinders : 1 - Correlation of single-cylinder engine temperatures under forced-convection cooling conditions
- Heated annuli computer program
- High thermal conductance devices utilizing the boiling of lithium or silver
- Improved measurements of surface heat transfer by the method of cyclic temperature variations
- Influence of concentration and additives on R123/paraffinic material oil boiling heat transfer performance
- Insulation measurement and supervision in live AC and DC unearthed systems
- Internally heated convection and Rayleigh-BÃ©nard convection
- Investigation of a seeded PWR
- Investigation of burnout heat flux in rectangular channels at 2000 psia
- Investigation of materials for use in a heat transfer system containing liquid lead alloys, report no. XII : final report April 1, 1950 to June 30, 1951
- Investigation of tetralin explosion
- Jet array impingement with crossflow - correlation of streamwise resolved flow and heat transfer distributions
- Journal of engineering physics and thermophysics
- Journal of thermal engineering
- Large Bridgman type unit for preparing large and small diameter single crystals
- Laser ignition of energetic materials
- Liquid MHD power cycle studies
- Liquid crystalline polymers, Volume 1, Structure and chemistry
- Local heat transfer to blunt noses at high supersonic speeds
- Macro- to microscale heat transfer : the lagging behavior
- Metal-water reactions, [Part] IV, Heat transfer conditions during severe nuclear excursions in water cooled reactors
- Mixer-settler development : use of a shrouded paddle
- Mixing efficiency in mixer-settlers : the effect of flow and paddle variables
- Moderator graphite experiments in the SRE
- Multigroup, multiregion, one-space-dimension photon-diffusion theory calculation - program FN-gamma : (ANP program no. 728)
- Note of similarity conditions for flows with heat transfer
- On moment theory and controllability of one-dimensional vibrating systems and heating processes
- Operating experience with heat transfer system pumps at the Hallum Nuclear Power Facility
- PM development : task 5.0, local boiling heat transfer tests : single tube heat transfer and pressure drop tests
- PM-1 task 5, subtask 5.8 local boiling heat transfer tests : single tube heat transfer and pressure drop tests
- PWR plant container sizing criteria : studies of transient temperature and pressure in plant container following primary coolant system rupture
- Peak heat flux in nucleate boiling heat transfer
- Performance--two-phase pressure drop, burnout, and hydraulic oscillation of an inclined test section with net steam generation at 1000 PSIA
- Periodic heat flow in a stratified medium, with application to permafrost problems
- Physical properties of UO2SO4-D2O solutions and ThO2-H2O slurries
- Piqua OMR purification system development
- Polymer melt processing : foundations in fluid mechanics and heat transfer
- Pool boiling investigation of benzene, diphenyl, and benzene-diphenyl mixtures under pressure
- Precision measurement and calibration : selected NBS papers on heat
- Prediction of the critical heat flux in forced convection flow
- Preliminary heat transfer studies of OMR fuel elements
- Preliminary investigation of the effects of heat transfer on boundary-layer transition on a parabolic body of revolution (NACA RM-10) at a Mach number of 1.61
- Preliminary physics and heat transfer design calculations for a rocket fuel test reactor (RFTR)
- Preliminary results from a free-flight investigation of boundary-layer transition and heat transfer on a highly polished 8-inch-diameter hemisphere-cylinder at Mach numbers up to 3 and Reynolds numbers based on a length of 1 foot up to 17.7 x 106
- Pressure-temperature relation for constant-area compressible flow of a gas, considering heat transfer and friction with constant wall temperatures
- Process analysis and simulation in chemical engineering
- Reactor design and evaluation progress report ..
- Reactor heat transfer conference of 1956 : collected papers and reports of a conference held at New York, November 1 and 2, 1956.
- SRE heat transfer system demolition
- Satellite heat pipe
- Sodium Reactor Experiment Power Expansion Program : heat transfer systems modifications
- Startup data report for NRC/PNL Halden Assembly IFA-513
- Status of liquid-metal-heated steam generator technology
- Steady-state and transient thermal stresses in a tube subjected to internal heating
- Steam-water condensing-injector performance analysis with supersonic inlet vapor and convergent condensing section
- Stress-strain-temperature-time relationships for refractory materials
- Structural optimization and experimental investigation of the organic rankine cycle for solar thermal power generation
- Study of plutonium oxide heat generation in a wood moderated container
- Study of real gas and heat transfer effects on the design of hotshot wind tunnels
- Superheat process tube heat transfer tests nuclear superheat project
- Survey of methods for calculating gamma-ray heating
- TRANS-FUGUE-I : a digital code for transient two-phase flow and heat transfer
- Temperature coefficients and maximum rates of increase of reactivity for HRT
- Temperature distribution in a hollow cylindrical cup with a stem
- Temperature distribution in a hollow cylindrical manometer column
- Temperature variation, heat transfer, and void volume development in the transient atmospheric boiling of water
- The Effect of an arbitrary surface-temperature variation along a flat plate on the convective heat transfer in an incompressible turbulent boundary layer
- The Graetz Problem in cocurrent-flow, double-pipe, heat exchangers
- The carbon arc image furnace
- The effect of transverse temperature gradients on the heat transfer and friction for laminar flow of gases : technical report no. 247-3
- The effects of resonant vibrations on heat transfer at high reynolds numbers
- The frequency response of nucleate pool boiling heat transfer
- The occurrence of upstream dryout in uniformly heated channels
- The thermal insulating value of air spaces
- Theoretical and experimental studies on non-fourier heat conduction based on thermomass theory
- Theory and application of sliding contact of metals in sodium
- Thermal stress analysis of a cylinder of semi-plastic material
- Thermal stresses in tube with axial temperature gradient
- Thermal transport in oblique finned micro/minichannels
- Thermal transport in strongly correlated rare-earth intermetallic compounds
- Thermal warping of graphite pile
- Thermodynamics in nuclear power plant systems
- Thermophysics and aeromechanics
- Transient temperature in infinite plates, infinite cylinders, and spheres following a simultaneous step change in internal heat generation rate, coolant temperature and heat transfer coefficient
- Turbine contactor for solvent extraction
- Two-phase heat transfer with gas injection through a porous boundary surface
- Vapor formation and behavior in boiling heat transfer

## Embed

### Settings

Select options that apply then copy and paste the RDF/HTML data fragment to include in your application

Embed this data in a secure (HTTPS) page:

Layout options:

Include data citation:

<div class="citation" vocab="http://schema.org/"><i class="fa fa-external-link-square fa-fw"></i> Data from <span resource="http://link.libraries.ou.edu/resource/M2aOrJ67QFY/" typeof="CategoryCode http://bibfra.me/vocab/lite/Concept"><span property="name http://bibfra.me/vocab/lite/label"><a href="http://link.libraries.ou.edu/resource/M2aOrJ67QFY/">Heat -- Transmission</a></span> - <span property="potentialAction" typeOf="OrganizeAction"><span property="agent" typeof="LibrarySystem http://library.link/vocab/LibrarySystem" resource="http://link.libraries.ou.edu/"><span property="name http://bibfra.me/vocab/lite/label"><a property="url" href="http://link.libraries.ou.edu/">University of Oklahoma Libraries</a></span></span></span></span></div>

Note: Adjust the width and height settings defined in the RDF/HTML code fragment to best match your requirements

### Preview

## Cite Data - Experimental

### Data Citation of the Concept Heat -- Transmission

Copy and paste the following RDF/HTML data fragment to cite this resource

`<div class="citation" vocab="http://schema.org/"><i class="fa fa-external-link-square fa-fw"></i> Data from <span resource="http://link.libraries.ou.edu/resource/M2aOrJ67QFY/" typeof="CategoryCode http://bibfra.me/vocab/lite/Concept"><span property="name http://bibfra.me/vocab/lite/label"><a href="http://link.libraries.ou.edu/resource/M2aOrJ67QFY/">Heat -- Transmission</a></span> - <span property="potentialAction" typeOf="OrganizeAction"><span property="agent" typeof="LibrarySystem http://library.link/vocab/LibrarySystem" resource="http://link.libraries.ou.edu/"><span property="name http://bibfra.me/vocab/lite/label"><a property="url" href="http://link.libraries.ou.edu/">University of Oklahoma Libraries</a></span></span></span></span></div>`