#
Sandia Corporation
Resource Information
The organization ** Sandia Corporation** represents an institution, an association, or corporate body that is associated with resources found in **University of Oklahoma Libraries**.

The Resource
Sandia Corporation
Resource Information

The organization

**Sandia Corporation**represents an institution, an association, or corporate body that is associated with resources found in**University of Oklahoma Libraries**.- Label
- Sandia Corporation

## Context

Context of Sandia Corporation#### Creator of

- Civilian application releases through 1958
- Civilian application releases through 1959
- General instructions for recovery of radioactive contaminated equipment : to assist manufacturers in the recovery of their equipment contaminated as the result of a radiological disaster
- Index to Sandia Corporation publicly released reports, 1963-1968
- Standard environmental test methods
- Tolerances of position and form, including MMC

#### Contributor of

- TID-4500
- A Monte Carlo calculation of the neutron flux from a monoenergetic point source in air
- A Survey of fast-rising balloons and Rawin reflectors : T.J. Raftery, H.J. Plagge
- A capacitor monitor for high-energy capacitive storage banks
- A castable polyurethane
- A coaxial reflectometer system
- A compilation of longitudinal aerodynamic characteristics including pressure information for sharp-and blunt-nose cones having flat and modified bases
- A confidence limit computer
- A controlled thermal environment for dielectric breakdown strength studies
- A cumulative-results plan for small-sample inspection
- A design of a mercury-wetted coaxial switch
- A digital comparator
- A digital computer program for the simulation of sampled data systems
- A facility for the study of the effects of nuclear radiation on materials
- A formula for determining sample size in hypergeometric sampling when zero defectives are observed in the sample
- A high-voltage pulse generator for testing dielectric samples
- A homing parachute system
- A low-density potting compound
- A magnus theory for bodies of revolution
- A mathematical model for an associative memory
- A method for ascertaining the effect of large targets present in terrain return signals
- A method for calculating the cutting force component parallel to the plane of motion of the cutter
- A method for computing expected damage from a single bomb
- A method for obtaining radial distributions from optical measurements on cylindrical plasmas
- A method for performing a human-factors reliability analysis
- A method of calculating boundary-layer thickness in axisymmetric nozzles with laminar hypersonic flow
- A method of calibrating Press-Ewing long-period seisometers
- A new approach to cleanroom design
- A nomograph for single-sampling plans by attributes
- A plug-in magnetron radio frequency power source for the antenna pattern range facility
- A portable clean work station
- A preliminary study of the turret experiment : an operating test of unclad fuel at high temperatures
- A procedure for scheduling supplier surveys
- A pulse ammeter
- A risk-oriented approach to protection from nuclear weapons
- A scale-model experiment of the crater produced through terrain of randomly varying elevation by row charges : (a contribution to the Plowshare program)
- A short study of viscous constant-density aerodynamic equations in two-dimensional rectilinear coordinates
- A simple asymptotically chi-square statistic for distributions of runs
- A slide rule type of device to measure logarithmic decay times as presented by oscillograph records
- A small-scale investigation of the possibility of constructing low-relief earth-fill dams using nuclear explosives
- A stabilized transistor oscillator
- A study of Nevada Test Site wind variability
- A study of contour measuring systems
- A study of the effect of various fluoride treatments on the properties of barium titanate and lead zirconate titanate polycrystalline ferroelectric ceramics
- A study of the error involved in the near use of a radio interferometer
- A study of velocity profiles in the momentum integral method with slip boundary conditions
- A summary of available information on the vertical motions of air in the troposphere
- A survey of factors which influence stress corrosion crack initiation in several uranium base alloys
- A system for automated presentation of a vigilance task and recording of subject performance
- A system of standard atmospheres
- A table for computing trivariate normal probabilities
- A technique for obtaining particle activity and size distributions
- A theoretical examination of a variable reluctance diaphragm gage developed at Sandia Corporation
- A theoretical investigation of the control parameters required to shape the spike phase pulse in two-phase shock tests
- A trailing-camera technique for studying projectile penetration into earth materials
- A transistorized current-controlled oscillator for DC-excited strain gage application
- A transistorized reactivity measurement system
- A transistorized six-channel airborne strain gage calibrator and excitation unit
- A uniqueness property not enjoyed by the normal distribution
- APAR, automatic programming and recording
- APOTA (automatic positioning of telemetering antennas)
- Abstracting, storing and retrieving environmental engineering information
- Accuracy and reliability of the Sandia 220 MC telemetry system
- Aeroballistics of the Nitehawk 12 rocket system
- Aerospace nuclear safety : proceedings, Trinity section, American nuclear society national topical meeting, Oct. 1-4, 1963, Albuquerque, New Mexico
- Air-gun studies of ferroelectric materials (Second Printing)
- An acceptance sampling plan based on the distribution of the range when sampling from a triangular population
- An accurate shock calibrator for accelerometers
- An adjustable positive-limit magnetic torque wrench
- An aid to printed circuit layouts using the IBM-704 computer
- An algorithm for the calculation of a class of fixed points for serial linear systems
- An application of game theory to special weapons evaluation
- An economical, lightweight, foamed fin for rocket application
- An exploding wire as a fuse for the LASL capacitor bank--Zeus
- An exponential bound on the strong law of large numbers for linear stochastic processes with absolutely convergent coefficients
- An improved FM discriminator-detector for airborne telemetry receivers
- An index of tables and charts for use in gas dynamic studies
- An input system for automated library indexing and information retrieval, including preparation of catalog cards
- An introduction to aerodynamic stability
- An investigation of long-term stability of zener voltage references
- Analysis of pressure drop and heat transfer of a pebble-bed-storage heater for a hypersonic wind tunnel
- Analysis of wind-tunnel dynamic stability testing methods and data reduction
- Analytical determination of flight characteristics of aircraft
- Application of a first-production evaluation system to help assure materiel compatibility and functional reliance
- Argon operation of the 120-kw Sandia arc jet facility
- Atmospheric moisture data for thermal attenuation problems
- Atmospheric signals from explosions and their interpretation
- Atmospheric turbulence
- Automatic induction soldering
- Automatic recording unit
- Automatic tester for electrical fuses
- Base impellers for roll control of reentry vehicles
- Biomedical and aerosol studies associated with a field release of plutonium
- Bit rate generator and raw data conditioner
- Calibration of Mach 2 nozzle blocks with 6% perforated-wall test section
- Calibration of a peak current gage developed at Sandia Corporation
- Characteristics of a free supersonic helium jet issuing normally from a flat plate
- Close-in air blast form a nuclear event in NTS desert alluvium
- Coatings for uranium : Final report, March 1, 1959 to July 1, 1960
- Comments on the quantitative measurement of high-energy neutrons emitted from a pulsed source
- Comparison of fallout doses from Nevada tests (revised)
- Compilation and correlation of model starting loads from several supersonic wind tunnels
- Complementary roles of destructive and nondestructive testing in development programs
- Component acoustic testing plane wave tube and reverberant chamber methods
- Computer applications in quality control operations
- Computer control of engineering drawing, scheduling and procurement data
- Conference on clean room specifications : April 9 and 10, 1963, held at Sandia Corporation, Albuquerque, New Mexico
- Conical scanner for circular array
- Consider the acceptance method when reviewing the design
- Construction of a sea-level, Transisthmian canal using nuclear explosives : a research report prepared as part of the PLOWSHARE program
- Contact resistance and the effects of materials and process variables on contact resistance and contact reliability in switching devices
- Containment capsule impact safety study : phase A, progress report
- Contaminant effects study : final report, January 5 to September 15, 1962
- Contaminant effects study : phase report, January 5 to September 15, 1962
- Continuum electrostatic probes in the presence of negative ions : numerical computation
- Control of percentages in both tails of the normal distribution
- Correlation between sample means and sample ranges
- Craters from four equal charges in a horizontal square array
- Craters from two charges buried in vertical array
- Crystal accelerometer response to mechanical shock impulses
- Curves for estimating low blast over-pressure
- Cushioning materials for packaging
- DC power supply for ferroelectric loop generation
- Decomposition kinetics of the phenolic-carbon cloth FM 5055A ablator : : consecutive second order, II, Rate controlling reactions
- Depth of indentation on an impacting projectile
- Design analysis : an effective reliability tool
- Design and construction of a unit for measuring metal skin temperatures
- Design and construction of a unit for measuring metal skin temperatures, Phase I, Theoretical analysis and design
- Design and construction of a unit for measuring metal skin temperatures, Phase II, Laboratory investigation and construction of development models
- Design and materials as affected by elevated temperatures
- Design characteristics and performance of Sandia's Deacon-Arrow chaff-rocket system
- Design considerations in the use of 5000 series aluminum alloys
- Design criteria for printed circuit boards
- Design of the Sandia high-altitude sampler rocket system (HAS)
- Detached lever escapement study
- Determination of certification intervals for standard resistors and precision potentiometers
- Determination of chromium, cobalt, iron, and nickel in alloys
- Development of military components from beryllium by slip casting and powder metallurgy techniques
- Dichlorobenzidine as a curing agent for Adiprene L-100
- Dielectric breakdown of printed wiring assemblies in electronic packages
- Dielectric properties and phases of some Ga2O3-Nb2O5 ceramic compositions
- Digitizing printed circuit layouts for automatic artwork generation
- Disposition analysis
- Distribution free tests of independence based on the sample distribution function
- Distribution of the range and midrange when sampling from a negatively skewed right triangle population
- Distribution-free tolerance limits
- Dust monitoring in clean rooms
- Earthmoving by nuclear explosives
- Effect of jet density on induced flow around an axially symmetric jet
- Effects of a precursor shock wave on blast loading of a structure
- Effects of high neutron and gamma fluxes on the transmission characteristics of some optical glasses
- Electrical fuses and their utilization in Sandia Corporation systems
- Electrical operations manual for the Sandia Corporation twelve-inch wind tunnel
- Electromagnetic wave propagation in media of periodically time-varying permittivity
- Electromagnetic wave propagation in media of periodically time-varying permittivity
- Elevated temperature properties of 2014-T6 aluminum alloy
- Elevated temperature properties of 2024-T3 aluminum alloy
- Elevated temperature properties of 7075-T6 aluminum alloy
- Elicitation and use of expert judgement in performance assessment for high-level radioactive waste repositories
- Enclosure and sealing methods
- Energy-absorbing characteristics of several materials
- Environmental enginering abstracts
- Environmental testing of the RFD-2 re-entry vehicle
- Estimated nuclear explosive requirements for canal excavation
- Estimating safety probabilities from fallout forecasts for Nevada Test Site
- Evaluation of a curtained laminar down-flow clean room
- Evaluation of contractor quality control systems
- Evaluation of plated-through connections for printed circuit boards
- Evaluation of various types of personnel shelters exposed to an atomic explosion
- Experimental determination of the pressure drop through a pebble bed
- Experimental investigation of tantalum oxidation in simulated re-entry
- Experimental investigation of the blast loading on an idealized structure
- Experimental pressure distributions and force coefficients on block forms for varying Mach number, Reynolds number, and yaw angle
- Exploding-wire phenomena
- Fabrication of welded vessel for the Sandia engineering reactor
- Factors for one-sided tolerance limits and for variables sampling plans
- Factors influencing dial operation : three-digit multiple-turn dials
- Fall of small particles in the upper atmosphere
- Fallout contours at Albuquerque, New Mexico
- Feasibility study of a thermistor vacuum gauge
- Field-free ground motion produced by explosions
- Final design of Sandia's supersonic parachute test vehicle
- Flexural characteristics of radially loaded cylindrical shells with stiffening rings
- Flush printed circuit boards for timing switches for military applications
- Free-oscillation variable-deflection dynamic rig
- Functional standards and acceptance testing for the Atomic Energy Commission
- Galvanometer isolation pier
- Gas-cooled reactors ; : Sandia Corporation bibliography
- General purpose adhesives
- Generalized functions of Green for systems of ordinary differential equations
- Graphs of the hypergeometric O.C. and A.O.Q. functions for lot sizes 10 to 225
- Gray body radiation exchange in an enclosure
- Handy formulas concerning narrow-band delivery of energy stored in coils or capacitors
- Health physics apsects of Operation Roller Coaster
- Health physics aspects of the start-up and operation of the Sandia Pulsed Reactor Facility (SPRF)
- High explosive crater studies : desert alluvium
- High explosive crater studies : tuff
- High time resolution telemetry by microwave RF link
- High velocity shock testing, equipment and methods
- High-altitude psychrometric tables
- High-explosive ditching from linear charges
- High-speed sequential gate control circuitry
- High-vacuum techniques
- Homogeneity of the magnetic field of a Helmholtz coil
- Hot-area concept for radiation test facilities
- How positional tolerancing clarifies design intent and reduces product cost
- Hugoniot data for some geologic materials
- Human factors in design of reliable systems
- IBM problem M curves
- Ignitron firing
- Ignitron resistance during high-current operation
- Ignitron-switched 0.6- to 90-kv impulse generator
- Impact physics
- Improving test equipment reliability by systematic design review techniques
- Improving transistor switching at elevated temperatures without the use of reverse bias
- Impulsive loading of a circular disk
- Impulsive loading of cylindrical shells
- Industrial hygiene handbook
- Inertial power supplies for ballistic missile re-entry vehicles
- Information, communication, and language
- Infrared spectrophotometric analysis of urethane compounds
- Initial peak surge current detection circuits
- Instrumentation application of carrier-erase magnetic-tape recording
- Instrumentation of aluminum bodies to determine interior temperature variations and rate of surface recession during exposure to nuclear explosions
- Insulation-resistance and high-potential testing guide for the design engineer
- Integrating the quality control contribution in research and development operations
- Interface formation and the adhesion of deposited thin films
- Intersystem crossing from higher excited states in complex molecules
- Inverse-method and method-of-characteristics flow-field programs
- Investigation and development of methods for producing high-porosity beryllium bodies : final report
- Investigation of component and process variation for tungsten delay compositions
- Investigation of the effect of delay body variables on the burning characteristics of tungsten delay composition
- Irreducible representations of line groups : the dynamics of polymer chains
- Isotopic exchange reactions : (unclassified references)
- Large exploding wires : correlation to small wires and pause time versus length dependency
- Leakage from pressurized containers during long term storage
- Line-focus solar central power systems, Phase I, Topical report
- Mach tables for real gas equilibrium flow of air in hypervelocity test facilities with total temperatures to 10,000Â°K
- Materials and processes for contact reliability
- Mathematical problems in seismology
- Measurement of free surface motion by the slanted resistor technique
- Measurement of power spectra for nonstationary random signals
- Measurement of the directivity of a coaxial directional coupler by use of a length of precision transmission line
- Measurements from Gravel Gertie tests
- Mechanical design analysis for whip-type antennae
- Metallurgical phenomena associated with active metal bonding
- Microbarograph evaluation report
- Microbarograph instrumentation
- Microbarograph measurements and interpretations of B-58 sonic booms : Project Big Boom
- Minimum yield of nuclear explosives required for canal excavation
- Molecular weights of macromolecules from viscosity measurements
- Moments of order statistics from the equicorrelated multivariate normal distribution
- Monitoring vibrations at U.S. Borax and Chemical Company potash refinery, final report
- Monthly observations of winds between 100,000 and 300,000 feet
- Multiaperture ferrite cores for infinite time constant devices
- Multiple-source Schlieren system (transonic wind tunnel)
- Neutron and gamma effects in dilute aqueous solutions
- Neutron bombardment reduction of transistor current gain
- Neutron flux and spectra measurements in the Sandia Pulsed Reactor Facility (SPRF)
- Neutron flux and spectra measurements in the void tank of the TRIGA Mark-F reactor
- New aluminum oxide humidity element : second report
- Nonelectrostatic solvent effects in chemical kinetics
- Nonlinear motion of an asymmetric body with variable roll rate
- Nonlinear resonances in the motion of rolling reentry bodies
- Nonparametric upper confidence bounds for Pr { Y [X } and confidence limits for Pr { Y [X } when X and Y are normal
- Notes on multivariate goodness-of-fit tests
- Nuclear battery powered timers
- On Riccati and Riccati-like equations arising in one-dimensional diffusion problems
- On a class of simple random walks
- On a method for obtaining bounds on the eigenvalues of certain integral equations
- On invariant probability measures I
- On invariant probability measures II
- On multistage estimation
- On operator solutions of boundary-value problems
- On the 2[summation sign]g and 2[summation sign]u states of the hydrogen molecule ion
- On the algebra of boundary-value problems
- On the central limit theorem for the sum of a random number of independent random variables
- On the distribution of linear functions and ratios of linear functions of ordered correlated normal random variables with emphasis on range
- On the identifiability problem for functions of finite Markov chains
- On the impedance of a base-driven vertical antenna with a radial ground system
- On the isomorphism problem for Bernoulli schemes
- On the monopole with inductive loading
- On the radar cross section of rods, tubes, and strips of finite conductivity
- On the radial eigenfunctions and asymptotic phase shifts of electrons scattered by Hartree potentials
- On the receiving characteristics of a dipole in proximity to two intersecting conducting surfaces
- On the strong law of large numbers for a class of stochastic processes
- One-hundred kilocycle transistorized programmable electronic counter-timer
- Operating manual for the Sandia clean bench
- Optical inspection device using fiber optics : Final report, April 1961 -- August 1961
- Orientation and scope of the present nondestructive testing field
- Orthant probabilities for the equicorrelated multivariate normal distribution
- Output mean and deviation versus input S/N for linear, quadratic, and quantizing envelope detectors with saturation
- Ozonosphere observations from propagation of atomic blast waves
- P-N junction theory and the junction transistor
- Particle motion near a nuclear detonation in halite : preliminary report
- Percentage points for the distribution of outgoing quality
- Performance of a high-velocity propellant gun for controlled impacts
- Photoionization of N2 and O2 ahead of strong shock waves in a shock tube
- Physical and electrical standardization program for the AEC
- Piezoelectric ceramic materials, final report : February 1, 1958 to January 31, 1959
- Positional tolerancing at Sandia Corporation
- Precision temperature control of air and oil baths
- Prediction of shock response
- Preliminary evaluation of earth targets for use in impact effects studies
- Preliminary manual for QUIKOD : a programming system for the IBM 709/7090 data processing machines
- Preliminary report on magnetogasdynamic aspects
- Preliminary report on measurement of soil stresses caused by an underground explosion
- Preliminary report on microbiological studies in a laminar down-flow clean room
- Preliminary study of spectrographic temperature measurements of an argon plasmajet
- Preparation of resistors using a low-temperature-coefficient-of-resistance electrolyte
- Pressure calibration of a reflection plane in the Sandia 12-inch transonic wind tunnel (Program III-40)
- Pressure distributions on sphere cones
- Pressure observations in the crater vicinity during the explosion of small charges in dry sand
- Pressure response in a long tube which is closed at one end
- Printed circuit laboratory manual
- Proceedings of the International Symposium for Packaging and Transportation of Radioactive Materials : held at Albuquerque, New Mexico, January 12-15, 1965
- Process acceptance versus lot acceptance
- Program for computing probabilities of fallout from a large-scale thermonuclear attack
- Programming Fisher's exact method of comparing two percentages
- Progress report, foundry metallurgy studies
- Project Buckboard : 20-ton and 1/2-ton high explosive cratering experiments in basalt rock, final report, August 1962
- Project SAND final program report : volume 1
- Project Scooter : Final Report October 1963
- Project Stagecoach : 20-ton HE cratering experiments in desert alluvium, final report, May 1962
- Propagation of an electromagnetic wave in a time-varying medium, Part I, General theory
- Properties of piezoelectric titanates and zirconates including a discussion of their control and evaluation
- Protecting magnesium from corrosion
- Pulse response of terrain return program receivers
- Pulse strength of high polymers
- Quality control program techniques
- Quantitive determination of residual leak-detection tracer gas using a standard leak detector
- Radar return from the vertical for ground and water surfaces
- Radial eigenfunctions, phase shifts, total elastic, differential elastic, and momentum transfer cross sections for electrons scattered from oxygen and nitrogen atoms
- Radiation effects testing at the Los Alamos Godiva II facility
- Radiation tolerance of a select group of semiconductor diodes
- Radiation-induced coloration in glass
- Radio squelch without tubes
- Radio-frequency attenuation measurements on high altitude nuclear detonations
- Radioactive environmental survey at Sandia Corporation
- Radiosonde observations analysis of system and personal errors
- Random permutations of selected powers of 2 and 3
- Random vibration terminology and analysis equipment
- Range safety considerations of the Deacon-Arrow sounding rocket
- Re-entry flight demonstration no. 1 (RFD-1) : optical data and fuel-element experiment
- Re-entry flight demonstration number one (RFD-1) : Comparison of the preflight and observed trajectories
- Re-entry flight demonstration number one (RFD-1) : Design, development, and performance of the re-entry vehicle
- Re-entry flight demonstration number one (RFD-1) : Final SNAP-10A safety flight-test plan
- Re-entry flight demonstration number one (RFD-1) : atmospheric sciences support
- Re-entry flight demonstration number one (RFD-1) : data book
- Re-entry flight demonstration number one (RFD-1) : preflight disassembly analysis and observed disassembly of the simulated SNAP-10A reactor
- Re-entry flight demonstration number two : interim flight-test report
- Receiving properties of balanced four-wire transmission lines excited by plane-wave electric fields
- Recent results in information theory
- Reception and transmission of transient electromagnetic fields
- Recommended procedure for evaluating permanency of residual polarization in ferroelectric ceramics
- Reduction of strain gage data : [technical memorandum
- Reentry flight demonstration number two (RFD-2) : spectrographs, photometers, and event cameras developed for SNAP reentry studes
- Relative cratering efficiency of nuclear explosives
- Relativistic hydrodynamics
- Reliability through process capability studies
- Research on piezoelectric materials and phenomena : final report
- Response of a balanced two- and four-wire transmission lines excited by plane-wave electric fields
- Response of pressure gauges to dust-laden shock waves
- Results of a force test of four configurations of the hi-lo instrumented and chaff rockets in the Sandia Corporation 12 x 12 inch transonic wind tunnel (Program III-46)
- Row-charge craters through terrain with a single elevation change : a contribution to the PLOWSHARE program)
- Salton Sea meteorological instrumentation test series, Salton Sea, California, conducted in September 1959
- Sampled data systems : a tutorial
- Sandia Corporation papers on reliability and related topics
- Sandia Corporation papers on reliability and related topics
- Sandia Engineering Reactor reactivity measurements
- Sandia diaphragm-type pressure transducer for shock wave measurements
- Sedan long range blast propagation, final report
- Shear strength of simply supported prestressed concrete beams having web reinforcement
- Shock signatures and spectra from railroad switching loads
- Slide-dam construction employing nuclear explosives
- Solar winds
- Solid and solid-liquid phases in wires at high current densities
- Solid interplanetary matter
- Solution to an explosive switch production problem through the use of quality control
- Some acceptance sampling plans based on the theory of runs
- Some microwave studies of gaseous plasmas
- Some of the things that are known and some that should be known about piezoelectric ceramic
- Some problems in the preparation of quality specifications
- Some proposed research activities pertaining to reliability
- Some tests of the diffraction of blast waves
- Space charge produced by cathode emission
- Space-charge studies
- Special tests for plutonium shipping containers 6M, SP5795, and L-10
- Spectrographic analysis of plasmajets : progress report II
- Sphere-cone-cone surface pressure distribution at Mach numbers of 5, 6, 8, and 10
- Stability analysis of the RFD-2 flight test vehicle
- Stability of a cable-moored airship
- Stability of an aerodynamic body with a rotor
- Standard tests for laminar flow devices
- Status of Sandia Laboratory hypersonic facilities
- Step-function approximation of continuous casualty functions
- Stress pulse-trains from multiple reflection at a zone of many discontinuities : a notation for machine solution
- Study of freight train accident experience of Class I railways
- Study of real gas and heat transfer effects on the design of hotshot wind tunnels
- Subsurface motion from a confined underground detonation : Part 1
- Subsurface motion from a confined underground detonation : part I
- Summary of pyrotechnic delay investigations for the AEC and Sandia Corporation
- Summary of static stability and drag characteristics of axisymmetric low-drag shapes for the subsonic to hypersonic mach number range
- Surface and subsurface strong motion measurements
- Surface flow angles on an ogive cylinder at angle of attack in supersonic flow
- Surface temperature anomalies in mountain area weather analysis
- Systems of numerical notation
- THERP
- Table of 20,000 gear ratios, 1.0000 to 3.0000
- Table of Arc sin x/2[pi], (d/dx)Arc Sin x, and Arc Sin (k/n)
- Table of atomic masses
- Tables and graphs of the normalized response of two coupled mass spring systems with dampers subjected to a frequency squared driver
- Tables for computing bivariate normal probabilities
- Tables of isentropic flow of hydrogen gas with equilibrium composition
- Tables of roots of the first ten thousand integers
- Tables of the distribution of the coefficient of coherence for stationary bivariate Gaussian processes
- Technical analysis and definition : a field of engineering study
- Temperature in length measurement
- Test of 61S-T6 aluminum sheet under short-duration, high rate of rise, heating
- Test results from automatic yield indicators : Operation Hardtack - project 43.10
- Tests and confidence intervals based on the metric d2
- The Hugoniot equation of state of 6061-T6 aluminum at low pressures
- The ROMOTAR system at Salton Sea Test Base
- The Sandia APAR-3G system : Automatic programming, recording, and control for development and production testing
- The Sandia Corporation 12-inch transonic wind tunnel analog-to-digital data gathering system
- The Sandia Corporation Pulsed Reactor Facility (SPRF)
- The Sandia Pulsed Reactor Facility (SPRF)
- The Sandia dust tube : development and an experiment
- The TTA generalized rigid body trajectory program for digital computer
- The U.S. Weather Bureau-Sandia Corporation co-operative project in climatology : (upper-wind statistics from USWB-FCDA data: final report)
- The acoustic response of a spherical bubble
- The automation of product testers
- The bivariate normal probability distribution
- The characteristics of a laminar boundary layer on a spinning tangent ogive cylinder at angle of attack
- The construction of geothermal steam power plants utilizing nuclear explosives
- The cumulative binomial distribution computer
- The design of a dust-controlled vented hood utilizing laminar air flow
- The determination of accurate values of admittance and effective length of cylindrical antennas
- The determination of aerodynamic stability coefficients from rocket flight test data
- The determination, application, and limitations of circuit reliability equations
- The distribution of absorbed x-ray energy in the atomosphere
- The economics of quality
- The effect of rain clouds on the design of radar altimeters
- The effect of rate of shearing deformation on the shearing resistance of a cohesionless soil
- The effect of row charge spacing and depth on crater dimensions
- The effects of noise in blast-resistant shelters : report to the test director
- The electrical behavior of exploding wires : a survey of various materials
- The electrical behavior of exploding wires, Part I, Experimental apparatus and equipment
- The electrical behavior of fine wires exploded by a coaxial cable discharge system
- The equations of growth
- The hypersonic plasma converter: I
- The latest development in the electroluminescent display of time readout system
- The oxidation of U(IV) by Tl(III) in the presence of chloride in an aqueous solution
- The oxidation of U(IV) by Tl(III) over an extended concentration range in aqueous-perchloric acid solutions
- The phantom gage (combined part and gage specifications)
- The piezoelectric response of quartz beyond its Hugoniot elastic limit
- The possibilities of reducing neutron-induced contamination of underground bursts
- The propagation of transient electromagnetic fields into a cavity formed by two imperfectly conducting sheets
- The radiation chemistry of organic dyes
- The reaction of mulberry with various gases
- The relationship of skin conductance to behavior in a vigilance task
- The relationship of the binomial probability distribution to other probability distributions with a selected bibliography on the subject
- The response of terminated two-wire transmission line excited by nonuniform electromagnetic field
- The shape of a shock wave derived from a spherical shock wave incident on a concave wedge
- The theoretical pattern of the turnstile antenna
- The theory and design of the triggered spark gap
- The unbalanced line directional coupler
- The unit cell of Hodgkinsonite
- The use of compensation with directional couplers
- The use of transient analysis in the evaluation of electromagnetic relays
- Theoretical characteristics of several fluid-metering instruments
- Theories and applications of very low temperatures
- Theories of auroras
- Theory of coupled folded antennas
- Thermodynamic properties of the metal bromides, iodides, sulfides, sulfates, chromates, metaphosphates, orthophosphates, molybdates, tungstates, borates and hydroxides : final report
- Three dimensional surface fit : M-151
- Three low-pressure spall thresholds in copper
- Threshold parity, a foundation for mutual deterrance, arms race control, and disarmament
- Tolerance comparator
- Tolerance limits for the class of distributions with increasing hazard rates
- Training for reliability and quality control
- Transient electromagnetic field propagation through infinite sheets, into spherical shells, and into hollow cylinders
- Transient response of a class of rectangular loop antennas
- Transmission of neutrons by cylindrical ducts penetrating radiation shields
- Transparent cold-shock-resistant epoxy casting resin
- Transport theory and spectral problems
- Tunnel diode applications to logic and pulse circuits
- Turbulent mixing of axisymmetric compressible jets : (in the half-jet region) with quiescent air
- Twin noise squelch unit utilizing printed circuit techniques
- Two approaches to AOQ
- Type and quantity of data available at Sandia Corporation on pulse radar return from the ground
- Ultrasonic cleaning of transistors
- Underground mining with nuclear explosives
- Upper confidence limits for the failure probability of complex networks
- Use of dual-level logic aids in block diagram development
- Use of the "action integral" in EW studies
- Uses of the table of the circular coverage function
- Vapor pressures of the rare earths
- Variable inductance modulation of a transistorized subcarrier oscillator
- Variables sampling plans based on non-normal populations
- Viscous shock-layer flow in the windward plane of cones at angle of attack
- Visual aids for manufacturing personnel
- Waveform effects in shock testing
- Wind tunnel study of the influence of orifice geometry and flow rates on the measured pressure error of a static pressure probe at Mach 3
- Workmanship, the key to improving quality
- Zeus control system
- Zeus firing system

#### Focus of

## Embed (Experimental)

### Settings

Select options that apply then copy and paste the RDF/HTML data fragment to include in your application

Embed this data in a secure (HTTPS) page:

Layout options:

Include data citation:

<div class="citation" vocab="http://schema.org/"><i class="fa fa-external-link-square fa-fw"></i> Data from <span resource="http://link.libraries.ou.edu/resource/CaefXk8iJ-M/" typeof="Organization http://bibfra.me/vocab/lite/Organization"><span property="name http://bibfra.me/vocab/lite/label"><a href="http://link.libraries.ou.edu/resource/CaefXk8iJ-M/">Sandia Corporation</a></span> - <span property="potentialAction" typeOf="OrganizeAction"><span property="agent" typeof="LibrarySystem http://library.link/vocab/LibrarySystem" resource="http://link.libraries.ou.edu/"><span property="name http://bibfra.me/vocab/lite/label"><a property="url" href="http://link.libraries.ou.edu/">University of Oklahoma Libraries</a></span></span></span></span></div>

Note: Adjust the width and height settings defined in the RDF/HTML code fragment to best match your requirements

### Preview

## Cite Data - Experimental

### Data Citation of the Organization Sandia Corporation

Copy and paste the following RDF/HTML data fragment to cite this resource

`<div class="citation" vocab="http://schema.org/"><i class="fa fa-external-link-square fa-fw"></i> Data from <span resource="http://link.libraries.ou.edu/resource/CaefXk8iJ-M/" typeof="Organization http://bibfra.me/vocab/lite/Organization"><span property="name http://bibfra.me/vocab/lite/label"><a href="http://link.libraries.ou.edu/resource/CaefXk8iJ-M/">Sandia Corporation</a></span> - <span property="potentialAction" typeOf="OrganizeAction"><span property="agent" typeof="LibrarySystem http://library.link/vocab/LibrarySystem" resource="http://link.libraries.ou.edu/"><span property="name http://bibfra.me/vocab/lite/label"><a property="url" href="http://link.libraries.ou.edu/">University of Oklahoma Libraries</a></span></span></span></span></div>`