#
Plasticity
Resource Information
The concept ** Plasticity** represents the subject, aboutness, idea or notion of resources found in **University of Oklahoma Libraries**.

The Resource
Plasticity
Resource Information

The concept

**Plasticity**represents the subject, aboutness, idea or notion of resources found in**University of Oklahoma Libraries**.- Label
- Plasticity

## Context

Context of Plasticity#### Subject of

No resources found

No enriched resources found

- A comparative study of some selected plasticity models for granular soil
- A fundamental investigation of surface viscosity and surface plasticity
- A study of isochromatic lines in transparent models under finite plastic deformation
- A transient plasticity study and low cycle fatigue analysis of the Space Station Freedom Photovoltaic solar array blanket
- Abnormal grain growth in S-816 alloy
- Adiabatic shear localization : frontiers and advances
- Adiabatic shear localization : occurrence, theories, and applications
- Advanced numerical applications and plasticity in geomechanics
- An Investigation of pure bending in the plastic range when loads are not parallel to a principal plane
- An automatic recording plastometer for plastic properties of coal
- An engineering theory of plasticity.
- An experimental study of infinitesimal and finite plastic deformation in FCC polycrystalline metals
- An inelastic analysis of a welded aluminum joint
- An introduction to plasticity
- An introduction to plasticity
- An introduction to the method of characteristics
- Anisotropic constitutive modeling for nickel-base single crystal superalloys
- Application of kinematic hardening models to cyclic plasticity structural analysis problems with combined material and geometric nonlinearities
- Applied plasticity
- Basic engineering plasticity : an introduction with engineering and manufacturing applications
- Behavior of full and partial penetration transverse groove welds under uniaxial cyclic loading
- Calculation of elastic-plastic flow
- Calorimetric studies of plastic deformation and phase transformations : report for period June 1, 1953 - August 31, 1954
- Calorimetric studies of plastic deformation and phase transformations for period ending December 1, 1952
- Compressive strength of flanges
- Computational plasticity
- Constitutive equations in plasticity
- Continuum mechanics : elasticity, plasticity, viscoelasticity
- Continuum mechanics and plasticity
- Continuum theory of plasticity
- Cyclic deformation and fatigue of metals
- Cyclic plasticity and low cycle fatigue life of metals
- Defects and processes in the solid state : geoscience applications : the McLaren volume
- Dislocation dynamics and plasticity
- Dislocations and plastic deformation,
- Dislocations and plastic flow in crystals
- Dynamic edge dislocation displacements and Peierls strains in a linear elastic strip
- Dynamic microindentation of RDX : effect of rate on plasticity and fracture
- Dynamic plasticity
- Dynamic plasticity.
- Elastic and inelastic stress analysis
- Elastic plastic fracture mechanics methodology for surface cracks : semiannual report
- Elastic-plastic finite element method of plane stress
- Elasticity and plasticity of large deformations : an introduction
- Elasticity and plasticity of large deformations : an introduction
- Elasticity and plasticity. : The mathematical theory of elasticity
- Elasticity, fracture and flow, : with engineering and geological applications
- Elasticity, plasticity and structure of matter
- Elements of plasticity : theory and computation
- Engineering plasticity
- Engineering plasticity
- Engineering plasticity
- Engineering plasticity : papers for a conference held in Cambridge, March 1968
- Fatigue crack layer propagation in silicon-iron
- Finite plastic deformation of crystalline solids
- Foundations of the numerical analysis of plasticity
- Foundations of the theory of elasticity, plasticity, and viscoelasticity
- Foundations of the theory of plasticity.
- Fundamentals and engineering of severe plastic deformation
- Fundamentals of engineering plasticity
- Fundamentals of engineering plasticity
- Girlhood and the plastic image
- Hedstrom plot for the calculation of laminar flow pressure drop for Bingham plastic materials with Hedstrom numbers from 0 to 1015
- Ice dynamics
- Inelastic behavior of load-carrying members
- Inelastic steel structures,
- Integrodifferential Relations in Linear Elasticity
- Introduction to adiabatic shear localization
- Introduction to computational plasticity
- Introduction to continuum mechanics.
- Introduction to mechanics of continua
- Introduction to the theory of plasticity for engineers
- Investigations and Applications of Severe Plastic Deformation
- Kristallplastizitat, : mit besonderer Berucksichtigung der Metalle
- Mathematical problems in plasticity
- Mathematical programming methods in structural plasticity
- Matrix plasticity in SiC/Ti-15-3 composite
- Mechanical behavior of high polymers
- Mechanical constitutive models for engineering materials : final report
- Mechanics of elastic-plastic fracture
- Mechanics of plastic deformation in metal processing
- Mechanics of solids
- Memorie presentate al Symposium su la plasticita nella scienza delle costruzioni : tenutosi a Villa Monastero in Varenna dal 25 al 27 settembre 1956, in onore di Arturo Danusso, per iniziativa dei suoi allievi e di amici a testimonianza della loro gratitudine verso il maestro insigne
- Micromechanics of flow in solids
- Microplasticity and failure of metallic materials
- Nonlinear theory of continuous media
- On the abnormal phenomena observed in the electrical resistivity measurement during the decomposition process of saturated Cu-Fe alloys
- On the correspondence between relaxation and rate characteristics in plastic extension
- On the effect of change in deformation rate on plastic deformation
- On the nature of viscous destruction of metals
- Orientation effects on the measurement and analysis of critical CTOA in an aluminum alloy sheet
- Physical basis of plasticity in solids
- Physical mesomechanics of heterogeneous media and computer-aided design of materials
- Physics of strength and plasticity.
- Plastic bending : theory and applications
- Plastic buckling of simply supported compressed plates
- Plastic deformation : processes, properties and applications
- Plastic deformation, principles and theories,
- Plastic design in structural steel : lecture notes
- Plastic design of steel frames
- Plastic flow and fracture in solids
- Plastic instability of cylindrical shells with rigid end closures : topical report
- Plastic tensile instability in orthotropic sheets subject to biaxial loading at an arbitrary orientation
- Plasticity : a treatise on the finite deformation of heterogeneous inelastic materials
- Plasticity : fundamentals and general results
- Plasticity : mathematical theory and numerical analysis
- Plasticity : mathematical theory and numerical analysis
- Plasticity Theory
- Plasticity and Geomechanics
- Plasticity and beyond : microstructures, crystal-plasticity and phase transitions
- Plasticity and creep of metals
- Plasticity and fracture
- Plasticity and geomechanics
- Plasticity and geomechanics
- Plasticity and geotechnics
- Plasticity and geotechnics
- Plasticity and high temperature strength of materials : combined micro- and macro-mechanical approaches
- Plasticity and textures
- Plasticity for engineers
- Plasticity for mechanical engineers
- Plasticity for structural engineers
- Plasticity for structural engineers
- Plasticity in plant-growth-promoting and phytopathogenic bacteria
- Plasticity in the sensory systems of invertebrates
- Plasticity of metals; : the mechanical behavior and the changes in structure of metals under plastic deformation
- Plasticity of metals; : the mechanical behaviour and the changes in structure of metals under plastic deformation
- Plasticity of pressure-sensitive materials
- Plasticity theory
- Plasticity; theory and application
- Principles of hyperplasticity : an approach to plasticity theory based on thermodynamic principles
- Principles of hyperplasticity : an approach to plasticity theory based on thermodynamic principles
- Proof test of the computer program BUCKY for plasticity programs
- Recent trends in the development of the theory of plasticity,
- Research and development program for the development of advanced time-temperature dependent constitutive relationships
- Resistance of metals to plastic deformation
- Rheology and processing of polymer nanocomposites
- Résine et complexité matérielle : traité sur la manœuvre de la résine en sculpture
- Severe Plastic Deformation : Methods, Processing and Properties
- Severe plastic deformation : toward bulk production of nanostructured materials
- Severe plastic deformation technology
- Some data on the relation of relaxation and rate characteristics in plastic deformation
- Strain gradient plasticity-based modeling of damage and fracture
- Structure of a viscoplastic theory
- Studies in Large Plastic Flow and Fracture : With Special Emphasis on the Effects of Hydrostatic Pressure
- Studies in large plastic flow and fracture with special emphasis on the effects of hydrostatic pressure
- Studies in large plastic flow and fracture, : with special emphasis on the effects of hydrostatic pressure
- Study of a deformed state by radioactive isotopes
- Techniques of analysis of load-displacement records by J-integral methods
- Teoriia idealno plasticheskikh tel,
- The boundary element method applied to inelastic problems
- The constitutive law in thermoplasticity
- The effect of plastic deformation arising during decomposition of a solid solution on the rate of growth of a nucleus of the new phase
- The mathematical theory of plasticity
- The mathematical theory of plasticity
- The mechanical and thermodynamical theory of plasticity
- The mechanics of crystals and textured polycrystals
- The path of the deformation process as a basic characteristic of the deformed state of a plastic body
- The plastic methods of structural analysis
- The role of grain boundaries in the plastic deformation of aluminum
- Theoretical elasticity and plasticity for engineers
- Theorie de la plasticite pour les applications a la mecanique des sols.
- Theories on flow and fracture in metalworking processes
- Theory of Elasticity and Plasticity
- Theory of elasticity and plasticity
- Theory of flow and fracture of solids
- Theory of perfectly plastic solids
- Theory of plasticity
- Theory of plasticity
- Theory of plasticity and limit design of plates
- Theory of plasticity,
- Thermal stress analysis of a cylinder of semi-plastic material
- Thermomechanical effects in high-speed seal rubs : final report : covering period from February 26, 1979 to December 31, 1984
- Ultimate fracture failure analysis of structures using incremental plasticity theory
- Unified plasticity for engineering applications
- Variational methods for problems from plasticity theory and for generalized Newtonian fluids
- Variational methods in elasticity and plasticity
- Workshop on inelastic constitutive equations for metals : experimentation-computation-representation, held July 23-24, 1974 at Rensselaer Polytechnic Institute, Troy, New York

## Embed

### Settings

Select options that apply then copy and paste the RDF/HTML data fragment to include in your application

Embed this data in a secure (HTTPS) page:

Layout options:

Include data citation:

<div class="citation" vocab="http://schema.org/"><i class="fa fa-external-link-square fa-fw"></i> Data from <span resource="http://link.libraries.ou.edu/resource/-MN8bkxgsHY/" typeof="CategoryCode http://bibfra.me/vocab/lite/Concept"><span property="name http://bibfra.me/vocab/lite/label"><a href="http://link.libraries.ou.edu/resource/-MN8bkxgsHY/">Plasticity</a></span> - <span property="potentialAction" typeOf="OrganizeAction"><span property="agent" typeof="LibrarySystem http://library.link/vocab/LibrarySystem" resource="http://link.libraries.ou.edu/"><span property="name http://bibfra.me/vocab/lite/label"><a property="url" href="http://link.libraries.ou.edu/">University of Oklahoma Libraries</a></span></span></span></span></div>

Note: Adjust the width and height settings defined in the RDF/HTML code fragment to best match your requirements

### Preview

## Cite Data - Experimental

### Data Citation of the Concept Plasticity

Copy and paste the following RDF/HTML data fragment to cite this resource

`<div class="citation" vocab="http://schema.org/"><i class="fa fa-external-link-square fa-fw"></i> Data from <span resource="http://link.libraries.ou.edu/resource/-MN8bkxgsHY/" typeof="CategoryCode http://bibfra.me/vocab/lite/Concept"><span property="name http://bibfra.me/vocab/lite/label"><a href="http://link.libraries.ou.edu/resource/-MN8bkxgsHY/">Plasticity</a></span> - <span property="potentialAction" typeOf="OrganizeAction"><span property="agent" typeof="LibrarySystem http://library.link/vocab/LibrarySystem" resource="http://link.libraries.ou.edu/"><span property="name http://bibfra.me/vocab/lite/label"><a property="url" href="http://link.libraries.ou.edu/">University of Oklahoma Libraries</a></span></span></span></span></div>`