Borrow it
Coverart for item
The Resource In-situ studies with photons, neutrons and electrons scattering II, Thomas Kannengiesser [and others], editors

In-situ studies with photons, neutrons and electrons scattering II, Thomas Kannengiesser [and others], editors

Editor
Contributor
Summary
This book provides an insight into current research topics, focusing special attention exactly on welding issues. The presented research work demonstrates that application of synchrotron and neutron radiation in combination with other techniques enables the basic understanding of material-related processes to be extended appreciably. It also shows ways of how to improve new materials and their use in industry. Following on from the 1st workshop in 2009 at BAM Berlin, a 2nd workshop dealing with this subject matter was held in 28-30 November, 2012 in Osaka/Japan with international participation of scientists from sixteen countries. The book includes selected contributions from the various subject blocks, precisely covering issues of practical and immediately implementable benefit to industrial enterprises. Therefore, peer-reviewed papers dealing with the following topics are contained as well: -Phase transformation during welding, metallurgy and material development -Evolution and significance of residual stresses -Investigations into laser and electron beam welding
Language
eng
Work
Publication
Extent
1 online resource (viii, 259 pages)
Contents
  • Hybrid system for in-situ observation of microstructure evolution in steel materials
  • In-situ Phase transformation study in fine grained heat affected zone of Grade 91 steels
  • In-situ synchrotron diffraction studies on peak broadening during bainitic transformation in a high strength quenched and tempered steel
  • In-situ synchrotron diffraction studies on the formation, decomposition and stabilisation of austenite in TRIP steels during simulated weld thermal cycles
  • In-situ observation of lattice-strain and solid state transformation in low temperature transformation weld metal by synchrotron X-rays
  • Compressive residual stress in welded joints with low-temperature-transformation weld metal in high-strength steel
  • In-situ observation of changing crystal orientations during austenite grain coarsening
  • In-situ observations of microstructural evolution during annealing or deformation in an electro-deposited fine-grained iron
  • In situ measurements of hydrogen diffusion in duplex stainless steels by neutron radiography
  • High-energy Synchrotron Study of the Stress-strain Behavior of Hydrogen-charged High Strength Structural Steel
  • Determination of the Welding Residual Stress Field by Diffraction Methods and Studying its Behavior under uniaxial and multiaxial Mechanical Loading
  • Visualization Technique for Quantitative Evaluation in Laser Welding Processes
  • Investigation of Processes in the Keyhole of Electron-Beam Welding by Monitoring the Secondary Current Signal in the Plasma
  • Development in in-situ observation of deformation in semi-solid alloys using X-ray imaging
  • Advanced Facility For Parallel Thermo-Mechanical Simulation and Synchrotron X-Ray Diffraction
Isbn
9783319061443
Link
https://ezproxy.lib.ou.edu/login?url=http://link.springer.com/10.1007/978-3-319-06145-0
Instance
Label
In-situ studies with photons, neutrons and electrons scattering II
Title
In-situ studies with photons, neutrons and electrons scattering II
Statement of responsibility
Thomas Kannengiesser [and others], editors
Contributor
Editor
Subject
Genre
Language
eng
Summary
This book provides an insight into current research topics, focusing special attention exactly on welding issues. The presented research work demonstrates that application of synchrotron and neutron radiation in combination with other techniques enables the basic understanding of material-related processes to be extended appreciably. It also shows ways of how to improve new materials and their use in industry. Following on from the 1st workshop in 2009 at BAM Berlin, a 2nd workshop dealing with this subject matter was held in 28-30 November, 2012 in Osaka/Japan with international participation of scientists from sixteen countries. The book includes selected contributions from the various subject blocks, precisely covering issues of practical and immediately implementable benefit to industrial enterprises. Therefore, peer-reviewed papers dealing with the following topics are contained as well: -Phase transformation during welding, metallurgy and material development -Evolution and significance of residual stresses -Investigations into laser and electron beam welding
Cataloging source
GW5XE
Dewey number
620.167
Illustrations
illustrations
Index
no index present
LC call number
TA410
Literary form
non fiction
Nature of contents
  • dictionaries
  • bibliography
http://library.link/vocab/relatedWorkOrContributorName
Kannengiesser, Thomas
http://library.link/vocab/subjectName
  • Materials
  • Electrons
  • Neutrons
  • Photons
  • TECHNOLOGY & ENGINEERING
  • TECHNOLOGY & ENGINEERING
  • Electrons
  • Materials
  • Neutrons
  • Photons
Label
In-situ studies with photons, neutrons and electrons scattering II, Thomas Kannengiesser [and others], editors
Link
https://ezproxy.lib.ou.edu/login?url=http://link.springer.com/10.1007/978-3-319-06145-0
Instantiates
Publication
Copyright
Antecedent source
unknown
Bibliography note
Includes bibliographical references
Carrier category
online resource
Carrier category code
  • cr
Carrier MARC source
rdacarrier
Color
multicolored
Content category
text
Content type code
  • txt
Content type MARC source
rdacontent
Contents
Hybrid system for in-situ observation of microstructure evolution in steel materials -- In-situ Phase transformation study in fine grained heat affected zone of Grade 91 steels -- In-situ synchrotron diffraction studies on peak broadening during bainitic transformation in a high strength quenched and tempered steel -- In-situ synchrotron diffraction studies on the formation, decomposition and stabilisation of austenite in TRIP steels during simulated weld thermal cycles -- In-situ observation of lattice-strain and solid state transformation in low temperature transformation weld metal by synchrotron X-rays -- Compressive residual stress in welded joints with low-temperature-transformation weld metal in high-strength steel -- In-situ observation of changing crystal orientations during austenite grain coarsening -- In-situ observations of microstructural evolution during annealing or deformation in an electro-deposited fine-grained iron -- In situ measurements of hydrogen diffusion in duplex stainless steels by neutron radiography -- High-energy Synchrotron Study of the Stress-strain Behavior of Hydrogen-charged High Strength Structural Steel -- Determination of the Welding Residual Stress Field by Diffraction Methods and Studying its Behavior under uniaxial and multiaxial Mechanical Loading -- Visualization Technique for Quantitative Evaluation in Laser Welding Processes -- Investigation of Processes in the Keyhole of Electron-Beam Welding by Monitoring the Secondary Current Signal in the Plasma -- Development in in-situ observation of deformation in semi-solid alloys using X-ray imaging -- Advanced Facility For Parallel Thermo-Mechanical Simulation and Synchrotron X-Ray Diffraction
Dimensions
unknown
Extent
1 online resource (viii, 259 pages)
File format
unknown
Form of item
online
Isbn
9783319061443
Level of compression
unknown
Media category
computer
Media MARC source
rdamedia
Media type code
  • c
Note
SpringerLink
Other control number
10.1007/978-3-319-06145-0
Other physical details
illustrations
Quality assurance targets
not applicable
Reformatting quality
unknown
Sound
unknown sound
Specific material designation
remote
System control number
  • (OCoLC)881474355
  • (OCoLC)ocn881474355
Label
In-situ studies with photons, neutrons and electrons scattering II, Thomas Kannengiesser [and others], editors
Link
https://ezproxy.lib.ou.edu/login?url=http://link.springer.com/10.1007/978-3-319-06145-0
Publication
Copyright
Antecedent source
unknown
Bibliography note
Includes bibliographical references
Carrier category
online resource
Carrier category code
  • cr
Carrier MARC source
rdacarrier
Color
multicolored
Content category
text
Content type code
  • txt
Content type MARC source
rdacontent
Contents
Hybrid system for in-situ observation of microstructure evolution in steel materials -- In-situ Phase transformation study in fine grained heat affected zone of Grade 91 steels -- In-situ synchrotron diffraction studies on peak broadening during bainitic transformation in a high strength quenched and tempered steel -- In-situ synchrotron diffraction studies on the formation, decomposition and stabilisation of austenite in TRIP steels during simulated weld thermal cycles -- In-situ observation of lattice-strain and solid state transformation in low temperature transformation weld metal by synchrotron X-rays -- Compressive residual stress in welded joints with low-temperature-transformation weld metal in high-strength steel -- In-situ observation of changing crystal orientations during austenite grain coarsening -- In-situ observations of microstructural evolution during annealing or deformation in an electro-deposited fine-grained iron -- In situ measurements of hydrogen diffusion in duplex stainless steels by neutron radiography -- High-energy Synchrotron Study of the Stress-strain Behavior of Hydrogen-charged High Strength Structural Steel -- Determination of the Welding Residual Stress Field by Diffraction Methods and Studying its Behavior under uniaxial and multiaxial Mechanical Loading -- Visualization Technique for Quantitative Evaluation in Laser Welding Processes -- Investigation of Processes in the Keyhole of Electron-Beam Welding by Monitoring the Secondary Current Signal in the Plasma -- Development in in-situ observation of deformation in semi-solid alloys using X-ray imaging -- Advanced Facility For Parallel Thermo-Mechanical Simulation and Synchrotron X-Ray Diffraction
Dimensions
unknown
Extent
1 online resource (viii, 259 pages)
File format
unknown
Form of item
online
Isbn
9783319061443
Level of compression
unknown
Media category
computer
Media MARC source
rdamedia
Media type code
  • c
Note
SpringerLink
Other control number
10.1007/978-3-319-06145-0
Other physical details
illustrations
Quality assurance targets
not applicable
Reformatting quality
unknown
Sound
unknown sound
Specific material designation
remote
System control number
  • (OCoLC)881474355
  • (OCoLC)ocn881474355

Subject

Genre

Library Locations

  • Architecture LibraryBorrow it
    Gould Hall 830 Van Vleet Oval Rm. 105, Norman, OK, 73019, US
    35.205706 -97.445050
  • Bizzell Memorial LibraryBorrow it
    401 W. Brooks St., Norman, OK, 73019, US
    35.207487 -97.447906
  • Boorstin CollectionBorrow it
    401 W. Brooks St., Norman, OK, 73019, US
    35.207487 -97.447906
  • Chinese Literature Translation ArchiveBorrow it
    401 W. Brooks St., RM 414, Norman, OK, 73019, US
    35.207487 -97.447906
  • Engineering LibraryBorrow it
    Felgar Hall 865 Asp Avenue, Rm. 222, Norman, OK, 73019, US
    35.205706 -97.445050
  • Fine Arts LibraryBorrow it
    Catlett Music Center 500 West Boyd Street, Rm. 20, Norman, OK, 73019, US
    35.210371 -97.448244
  • Harry W. Bass Business History CollectionBorrow it
    401 W. Brooks St., Rm. 521NW, Norman, OK, 73019, US
    35.207487 -97.447906
  • History of Science CollectionsBorrow it
    401 W. Brooks St., Rm. 521NW, Norman, OK, 73019, US
    35.207487 -97.447906
  • John and Mary Nichols Rare Books and Special CollectionsBorrow it
    401 W. Brooks St., Rm. 509NW, Norman, OK, 73019, US
    35.207487 -97.447906
  • Library Service CenterBorrow it
    2601 Technology Place, Norman, OK, 73019, US
    35.185561 -97.398361
  • Price College Digital LibraryBorrow it
    Adams Hall 102 307 West Brooks St., Norman, OK, 73019, US
    35.210371 -97.448244
  • Western History CollectionsBorrow it
    Monnet Hall 630 Parrington Oval, Rm. 300, Norman, OK, 73019, US
    35.209584 -97.445414

Library Links

Zepheira Logo
Structured data from the Bibframe namespace is licensed under the Creative Commons Attribution 4.0 International License by University of Oklahoma Libraries. Additional terms may apply to data associated with third party namespaces.
Processing Feedback ...