The Resource A conceptual model for designing recycled aggregate concrete for structural applications, Marco Pepe

A conceptual model for designing recycled aggregate concrete for structural applications, Marco Pepe

Label
A conceptual model for designing recycled aggregate concrete for structural applications
Title
A conceptual model for designing recycled aggregate concrete for structural applications
Statement of responsibility
Marco Pepe
Creator
Author
Subject
Genre
Language
eng
Summary
This book reports on the physical and mechanical characterization of Recycled Aggregate Concrete (RAC), produced through a partial-to-total replacement of ordinary aggregates with what have been dubbed Recycled Concrete Aggregates (RCAs). It proposes a theoretical framework for understanding the relationships between RCAs and RCA, and for predicting the resulting behavior of RAC. The book demonstrates that in the case of RAC two additional parameters have to be taken into account than with ordinary aggregates, due to the composite nature and higher porosity of RCAs. By extending Abrams? Law for Recycled Aggregate Concrete, it represents a first step in the formulation of a general model for predicting the properties of RAC. The theoretical approach presented here addresses an important gap in the literature and is expected to stimulate new research on the use of this more sustainable form of concrete in structural applications
Member of
Cataloging source
N$T
http://library.link/vocab/creatorName
Pepe, Marco
Dewey number
620.1/36
Illustrations
illustrations
Index
no index present
LC call number
TA441
Literary form
non fiction
Nature of contents
  • dictionaries
  • bibliography
Series statement
Springer theses
http://library.link/vocab/subjectName
  • Aggregates (Building materials)
  • Concrete
  • Concrete
  • TECHNOLOGY & ENGINEERING
  • TECHNOLOGY & ENGINEERING
  • Aggregates (Building materials)
  • Concrete
  • Concrete
  • Mechanics of solids
  • Materials science
  • Mathematical physics
  • Building construction & materials
Label
A conceptual model for designing recycled aggregate concrete for structural applications, Marco Pepe
Link
https://ezproxy.lib.ou.edu/login?url=http://link.springer.com/10.1007/978-3-319-26473-8
Instantiates
Publication
Copyright
Note
"Doctoral thesis accepted by University of Salerno, Italy."
Antecedent source
unknown
Bibliography note
Includes bibliographical references
Carrier category
online resource
Carrier category code
cr
Carrier MARC source
rdacarrier
Color
multicolored
Content category
text
Content type code
txt
Content type MARC source
rdacontent
Contents
  • Parts of this thesis have been published in the following journal articles:; Supervisor's Foreword; Acknowledgments; Contents; Symbols and Abbreviations; About the Author; 1 Introduction; 1.1 Motivation; 1.2 Main Contributions; 1.3 Thesis Outline; References; 2 Concrete Industry: Waste Generation and Environmental Concerns; 2.1 Construction and Demolition Waste; 2.2 Concrete and Construction Industry: Aggregates Sources; 2.3 Concrete and Construction Industry: Cement Production; References; 3 Regulatory Environment and Guidelines for RACs; 3.1 The Italian Code for Constructions
  • 3.2 RILEM Recommendations3.3 DAfStb Guidelines and DIN Standards; 3.4 British Standards; 3.5 Buildings Department of the Hong Kong; 3.6 American Concrete Institute; 3.7 Cement Concrete and Aggregates Australia; 3.8 Main Conclusions Drawn from Existing Regulations and Standards; References; 4 Recycled Concrete Aggregates; 4.1 State of the Art for Recycled Concrete Aggregates (RCAs); 4.1.1 Processing Procedures; 4.1.2 Attached Mortar Evaluation; 4.1.3 Engineering Properties of RCAs; 4.2 Physical and Mechanical Characterisation of RCAs; 4.2.1 Attached Mortar Content
  • 4.2.2 Porosity, Water Absorption and Particle Density4.2.3 Mechanical Strength; 4.2.4 Bond Strength Between Aggregates and Cement Paste; 4.3 Alternative Processing Procedures for RCAs; References; 5 Recycled Aggregate Concretes; 5.1 Basic Aspects About Concrete Mix Design and Technology; 5.1.1 The Role of Aggregates in Concrete Mixture; 5.1.2 Portland Cement; 5.1.3 Influence of Moisture Content and w/c Ratio; 5.1.4 Curing Conditions; 5.2 State of the Art for Recycled Aggregate Concrete (RAC); 5.2.1 Workability; 5.2.2 Compressive Strength; 5.2.3 Static Modulus of Elasticity
  • 5.2.4 Tensile and Flexural Strength5.2.5 Drying Shrinkage; 5.3 Experimental Activities; 5.3.1 Influence of Alternative Processing Procedures on RCAs; 5.3.2 Influence of the Initial Moisture Condition of RCAs; 5.3.3 Influence of the Aggregate Replacement and Water to Cement Ratios; References; 6 Insights into the Influence of Cement Replacement in Recycled Aggregate Concrete; 6.1 Fly Ash in Recycled Aggregate Concrete; 6.1.1 Workability; 6.1.2 Compressive Strength; 6.1.3 Alkali-Silica Reaction; 6.1.4 Carbonation Depth; 6.1.5 Chloride Ion Penetration Resistance; 6.2 Experimental Activities
  • 6.2.1 Mix Composition and Experimental Programme6.2.2 Analysis of the Results; 6.3 Empirical Relationships for Compressive Strength of RAC+Fly Ash; 6.4 Conclusions; References; 7 Predicting the Mechanical Properties of RAC; 7.1 Compressible Packing Model; 7.1.1 Theoretical Formulation; 7.1.2 Application; 7.2 Lattice Model; 7.2.1 Theoretical Formulation; 7.2.2 Application; 7.3 A Proposed Conceptual Model for RACs; 7.3.1 Hydration Model; 7.3.2 Proposed Formulations for Predicting the Strength of RAC; 7.3.3 Model Validation; References; 8 Mix Design Formulation for RAC
Dimensions
unknown
Extent
1 online resource
File format
unknown
Form of item
online
Isbn
9783319264738
Level of compression
unknown
Media category
computer
Media MARC source
rdamedia
Media type code
c
Note
SpringerLink
Other control number
10.1007/978-3-319-26473-8
Other physical details
illustrations (some color).
Quality assurance targets
not applicable
Reformatting quality
unknown
Sound
unknown sound
Specific material designation
remote
System control number
  • (OCoLC)932198535
  • (OCoLC)ocn932198535
Label
A conceptual model for designing recycled aggregate concrete for structural applications, Marco Pepe
Link
https://ezproxy.lib.ou.edu/login?url=http://link.springer.com/10.1007/978-3-319-26473-8
Publication
Copyright
Note
"Doctoral thesis accepted by University of Salerno, Italy."
Antecedent source
unknown
Bibliography note
Includes bibliographical references
Carrier category
online resource
Carrier category code
cr
Carrier MARC source
rdacarrier
Color
multicolored
Content category
text
Content type code
txt
Content type MARC source
rdacontent
Contents
  • Parts of this thesis have been published in the following journal articles:; Supervisor's Foreword; Acknowledgments; Contents; Symbols and Abbreviations; About the Author; 1 Introduction; 1.1 Motivation; 1.2 Main Contributions; 1.3 Thesis Outline; References; 2 Concrete Industry: Waste Generation and Environmental Concerns; 2.1 Construction and Demolition Waste; 2.2 Concrete and Construction Industry: Aggregates Sources; 2.3 Concrete and Construction Industry: Cement Production; References; 3 Regulatory Environment and Guidelines for RACs; 3.1 The Italian Code for Constructions
  • 3.2 RILEM Recommendations3.3 DAfStb Guidelines and DIN Standards; 3.4 British Standards; 3.5 Buildings Department of the Hong Kong; 3.6 American Concrete Institute; 3.7 Cement Concrete and Aggregates Australia; 3.8 Main Conclusions Drawn from Existing Regulations and Standards; References; 4 Recycled Concrete Aggregates; 4.1 State of the Art for Recycled Concrete Aggregates (RCAs); 4.1.1 Processing Procedures; 4.1.2 Attached Mortar Evaluation; 4.1.3 Engineering Properties of RCAs; 4.2 Physical and Mechanical Characterisation of RCAs; 4.2.1 Attached Mortar Content
  • 4.2.2 Porosity, Water Absorption and Particle Density4.2.3 Mechanical Strength; 4.2.4 Bond Strength Between Aggregates and Cement Paste; 4.3 Alternative Processing Procedures for RCAs; References; 5 Recycled Aggregate Concretes; 5.1 Basic Aspects About Concrete Mix Design and Technology; 5.1.1 The Role of Aggregates in Concrete Mixture; 5.1.2 Portland Cement; 5.1.3 Influence of Moisture Content and w/c Ratio; 5.1.4 Curing Conditions; 5.2 State of the Art for Recycled Aggregate Concrete (RAC); 5.2.1 Workability; 5.2.2 Compressive Strength; 5.2.3 Static Modulus of Elasticity
  • 5.2.4 Tensile and Flexural Strength5.2.5 Drying Shrinkage; 5.3 Experimental Activities; 5.3.1 Influence of Alternative Processing Procedures on RCAs; 5.3.2 Influence of the Initial Moisture Condition of RCAs; 5.3.3 Influence of the Aggregate Replacement and Water to Cement Ratios; References; 6 Insights into the Influence of Cement Replacement in Recycled Aggregate Concrete; 6.1 Fly Ash in Recycled Aggregate Concrete; 6.1.1 Workability; 6.1.2 Compressive Strength; 6.1.3 Alkali-Silica Reaction; 6.1.4 Carbonation Depth; 6.1.5 Chloride Ion Penetration Resistance; 6.2 Experimental Activities
  • 6.2.1 Mix Composition and Experimental Programme6.2.2 Analysis of the Results; 6.3 Empirical Relationships for Compressive Strength of RAC+Fly Ash; 6.4 Conclusions; References; 7 Predicting the Mechanical Properties of RAC; 7.1 Compressible Packing Model; 7.1.1 Theoretical Formulation; 7.1.2 Application; 7.2 Lattice Model; 7.2.1 Theoretical Formulation; 7.2.2 Application; 7.3 A Proposed Conceptual Model for RACs; 7.3.1 Hydration Model; 7.3.2 Proposed Formulations for Predicting the Strength of RAC; 7.3.3 Model Validation; References; 8 Mix Design Formulation for RAC
Dimensions
unknown
Extent
1 online resource
File format
unknown
Form of item
online
Isbn
9783319264738
Level of compression
unknown
Media category
computer
Media MARC source
rdamedia
Media type code
c
Note
SpringerLink
Other control number
10.1007/978-3-319-26473-8
Other physical details
illustrations (some color).
Quality assurance targets
not applicable
Reformatting quality
unknown
Sound
unknown sound
Specific material designation
remote
System control number
  • (OCoLC)932198535
  • (OCoLC)ocn932198535

Library Locations

  • Architecture LibraryBorrow it
    Gould Hall 830 Van Vleet Oval Rm. 105, Norman, OK, 73019, US
    35.205706 -97.445050
  • Bizzell Memorial LibraryBorrow it
    401 W. Brooks St., Norman, OK, 73019, US
    35.207487 -97.447906
  • Boorstin CollectionBorrow it
    401 W. Brooks St., Norman, OK, 73019, US
    35.207487 -97.447906
  • Chinese Literature Translation ArchiveBorrow it
    401 W. Brooks St., RM 414, Norman, OK, 73019, US
    35.207487 -97.447906
  • Engineering LibraryBorrow it
    Felgar Hall 865 Asp Avenue, Rm. 222, Norman, OK, 73019, US
    35.205706 -97.445050
  • Fine Arts LibraryBorrow it
    Catlett Music Center 500 West Boyd Street, Rm. 20, Norman, OK, 73019, US
    35.210371 -97.448244
  • Harry W. Bass Business History CollectionBorrow it
    401 W. Brooks St., Rm. 521NW, Norman, OK, 73019, US
    35.207487 -97.447906
  • History of Science CollectionsBorrow it
    401 W. Brooks St., Rm. 521NW, Norman, OK, 73019, US
    35.207487 -97.447906
  • John and Mary Nichols Rare Books and Special CollectionsBorrow it
    401 W. Brooks St., Rm. 509NW, Norman, OK, 73019, US
    35.207487 -97.447906
  • Library Service CenterBorrow it
    2601 Technology Place, Norman, OK, 73019, US
    35.185561 -97.398361
  • Price College Digital LibraryBorrow it
    Adams Hall 102 307 West Brooks St., Norman, OK, 73019, US
    35.210371 -97.448244
  • Western History CollectionsBorrow it
    Monnet Hall 630 Parrington Oval, Rm. 300, Norman, OK, 73019, US
    35.209584 -97.445414
Processing Feedback ...